Medieval-Pro replacement roof panel.
Twill weave carbon.
Under-side image, exact OEM copy.
Accommodates the stock roof liner.
All hardware mimics stock panel.
ORDER HERE:
FIBERGLASS
http://www.heeltoeau...productid=63729
CARBON FIBER
http://www.heeltoeau...productid=63728
1
Medieval-pro Cf/fg Sunroof Panels
Started by MrDisibility, Nov 04 2008 05:51 PM
9 replies to this topic
#1
Posted 04 November 2008 - 05:51 PM
#2
Posted 04 November 2008 - 08:48 PM
#3
Posted 04 November 2008 - 10:12 PM
QUOTE (Stuckey85si @ Nov 5 2008, 01:48 AM) <{POST_SNAPBACK}>
Wait, Does it come with the rubber seal? If not, where can we buy one?
Thanks,
Joseph
Thanks,
Joseph
No you reuse the one on you roof now. If it is not reusable, it is about $85 from the dealer IF it is still available!
#4
Posted 05 November 2008 - 10:30 AM
QUOTE (MrDisibility @ Nov 4 2008, 10:12 PM) <{POST_SNAPBACK}>
No you reuse the one on you roof now. If it is not reusable, it is about $85 from the dealer IF it is still available!
Nope, they are all gone. I bought one of the very last ones a couple of years ago. I have a good used one if anyone needs it.
#5
Posted 05 November 2008 - 11:29 PM
Have you considered making a sunroof panel for the 2nd gen CRX?
Seems like the market for 2nd gen panels would be larger. (I could use one!)
Somebody on eeeebay is selling them, but I don't know anything about the quality.
Seems like the market for 2nd gen panels would be larger. (I could use one!)
Somebody on eeeebay is selling them, but I don't know anything about the quality.
#6
Posted 06 November 2008 - 12:51 PM
QUOTE (myheadhertz @ Nov 6 2008, 05:29 AM) <{POST_SNAPBACK}>
Have you considered making a sunroof panel for the 2nd gen CRX?
Seems like the market for 2nd gen panels would be larger. (I could use one!)
Somebody on eeeebay is selling them, but I don't know anything about the quality.
Seems like the market for 2nd gen panels would be larger. (I could use one!)
Somebody on eeeebay is selling them, but I don't know anything about the quality.
No I had not actually...but I think you are right about that market being a lot bigger.
#7
Posted 20 February 2009 - 06:31 PM
Is there anyway to fabricate a flush fit model and have it sealed. With the unavailability of seals and replacement motor parts a completely sealed solution seems more practical wouldn't you think. I would buy the first one and I am sure many people would as well. It would be an easy solution to many sunroof problems.
#8
Posted 18 June 2009 - 04:56 PM
just ordered my cf sunroof. does anyone know how long it usually takes to arrive?
Check out my build!http://www.redpepper...showtopic=48435
custom extended fiberglass rear spoiler that wont develop rust bumps and weighs half as much as oem!http://www.redpepper...showtopic=55523
Tired of replacing/fixing your brittle plastic fenders? Wihttp://www.redpepper...showtopic=55674
custom extended fiberglass rear spoiler that wont develop rust bumps and weighs half as much as oem!http://www.redpepper...showtopic=55523
Tired of replacing/fixing your brittle plastic fenders? Wihttp://www.redpepper...showtopic=55674
#9
Posted 22 June 2009 - 12:27 PM
These have been taking a while to get made and ship, Figure about 3-4 weeks at this point. we are waiting for a few of them to be completed. Each one takes 2-4 days to actually make!
#10
Posted 22 June 2009 - 07:07 PM
are these just for 1g?? or can this be used like a plug for the 3g?? new idea?? maybe make it so that the pop up handle can transfer onto one of these??
Dark Side of the Power........
Wheels
QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)
Wheels
QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)