2 replies to this topic

[Turbo12acer]

Looking for some DA front brakes. Basically everything i'll need to put them in besides and pads and rotors. I'll need the Caliper, Braket, Bolts and such. Located in 20120.


Thanks,
Eddie

[Vandemar]

Which DA? DA1 and DA3, if I remember correctly, are 86-9 Integras, and their brakes bolt onto 84-7 Civic/CRX's. DA8 and DA9 (again, I may be off on the numbers) are 90-93 Integras, and their brakes are 10.3" bits that won't work on the smaller hub/knuckles.

[Turbo12acer]

looking for the direct bolt on. MY only question now is do i need the brackets from the DA or does the original ones fit?

Which DA?  DA1 and DA3, if I remember correctly, are 86-9 Integras, and their brakes bolt onto 84-7 Civic/CRX's.  DA8 and DA9 (again, I may be off on the numbers) are 90-93 Integras, and their brakes are 10.3" bits that won't work on the smaller hub/knuckles.

<{POST_SNAPBACK}>