spliffmunsta

Hubs; or knuckles with hubs?

I can't see any codes on the hubs that are in the knuckles. The crx ones have a 24mm diameter axle, the teg ones have 27mm diameter axles. The teg ones are the 99.8% usual swap; the crx ones would be a quite unusual choice.

The codes I can see on the knuckles vary from 5 to 8 series, so I wouldn't want to assess from your codes. But have a look at the recent 'integra positive camber ' thread, where the measurements of the crx and teg knuckles were given. The major easy one was the steering arm length, teg being longer. Again, the teg one is the knuckle most often used.