hi lads I searched everywhere and I cant find the answer I have an irish 3g civic e-ah I think and im changing my suspension but on heeltoe it asks for torsion bar length either 24 or 24.5 and I cant find which ones are for me
any help appreciated
also ordering medieval tein setup with the 6 kg rears and 27mm torsion bars care is going to be a road going track car. will this setup be ok for starting off?
thanks
0
Torsion Bar Legnth
Started by DaveM, Jun 16 2013 12:07 PM
3 replies to this topic
#1
Posted 16 June 2013 - 12:07 PM
#2
Posted 16 June 2013 - 12:27 PM
You can get under the car and measure(the bars pretty much go from cap to cap so you should be able to notice a half inch difference
As for the setup you should be good to go since they are 16 point adjustable and with a set of caster/camber platea from chedda or from heel toe you should be rocking
I would find out what size torsions bars will work best with the springs you pick out
As for the setup you should be good to go since they are 16 point adjustable and with a set of caster/camber platea from chedda or from heel toe you should be rocking
I would find out what size torsions bars will work best with the springs you pick out