Jump to content




Can I See Your Mugen/repo Body Kitted Crx's


  • You cannot reply to this topic
23 replies to this topic

#16
1gencrx

  • I <3 Vintage Parts
  • PipPipPipPipPip
    • Group: 2010 Contributing Member
    • Location:Tulsa, OK
    • Drives: 1987 Honda CRX Si B17 2006 Saab 9-2X Aero #30/338
QUOTE (asianflava @ Nov 2 2011, 12:53 PM) <{POST_SNAPBACK}>
I don't know who actually made it, but Jackson Racing used to sell a "Nine Piece Aero Kit" which I think was a Mugen knock off. I remember a pic of "Orca" in Turbo magazine. It had the aero kit and a turbo set-up with the caption, "Getting ready to pierce 150mph with 1500cc."


Right, 9 piece is the mugen kit. I think they also sold a 6 piece kit which I would assume to be the one pictured.

sig1.jpg


#17
1stgenhybridCR-X

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:san jose, CA
    • Drives: 86 crx
QUOTE (1gencrx @ Nov 2 2011, 01:11 PM) <{POST_SNAPBACK}>
Right, 9 piece is the mugen kit. I think they also sold a 6 piece kit which I would assume to be the one pictured.


I dont know if this helps but here is a link to the same car talking about the kit, some say mugen and aero other say j's racing kit

http://www.redpepperracing.com/forums/inde...=j's+racing

#18
1gencrx

  • I <3 Vintage Parts
  • PipPipPipPipPip
    • Group: 2010 Contributing Member
    • Location:Tulsa, OK
    • Drives: 1987 Honda CRX Si B17 2006 Saab 9-2X Aero #30/338
QUOTE (1stgenhybridCR-X @ Nov 2 2011, 03:19 PM) <{POST_SNAPBACK}>
I dont know if this helps but here is a link to the same car talking about the kit, some say mugen and aero other say j's racing kit

http://www.redpepperracing.com/forums/inde...=j's+racing



Wow, that thread is painful to read, so much misinformation.

Here's a pic from the Jackson Racing catalog:



So there are molds out there somewhere for those fenders. I want them!

sig1.jpg


#19
1stgenhybridCR-X

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:san jose, CA
    • Drives: 86 crx
QUOTE (1gencrx @ Nov 2 2011, 04:20 PM) <{POST_SNAPBACK}>
Wow, that thread is painful to read, so much misinformation.

Here's a pic from the Jackson Racing catalog:



So there are molds out there somewhere for those fenders. I want them!


Nice find man! well that is the kit, with the added aero pieces in the back and front bumpers i guess the nine piece in the mystery black crx photo, no mugen pieces. Good luck finding them, they might pop up sometime, you never know

#20
asianflava

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Central FL
    • Drives: 07 Tundra CrewMax 89 Si hatch 85 & 91 CRX Si
I think the 6pc was the same as the 9pc minus the front & rear fascia and the spoiler.

#21
1gencrx

  • I <3 Vintage Parts
  • PipPipPipPipPip
    • Group: 2010 Contributing Member
    • Location:Tulsa, OK
    • Drives: 1987 Honda CRX Si B17 2006 Saab 9-2X Aero #30/338
QUOTE (asianflava @ Nov 2 2011, 06:57 PM) <{POST_SNAPBACK}>
I think the 6pc was the same as the 9pc minus the front & rear fascia and the spoiler.


No, it has already been established that the fenders are different. The 9 piece includes the header panel and front and rear fascia's. The 9 piece is probably Housman's kit. I'm surprised he doesn't know who was making the 6 piece kit back then.

sig1.jpg


#22
OG Wagon

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Mooresville, NC
    • Drives: 1986 Crx Si
Man, o man, I want that Jackson kit! Did you guys read the caption by the pic. Says that the rear quarters bolt right up to existing taillight and door sill bolt holes. Says no "bonding" necessary.

Basically, I find this kit, paint match it, install, and I'm good: superstar status in about a week. Why are we all so obsessed over Mugen. Let's shift some focus here, find THIS kit, and mass produce it!


WagoCats HOOOOOOOO!!!!!

#23
ballade

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:Barrie Ontario
    • Drives: 1985 CRX Si B16A / 1992 Integra RS B18C
    • Image Gallery
OG I like your idea.

#24
toxicshit

if those front fender molds pop up somewhere i would like a site like the ones in the jackson racing catalog!

1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
cr-x.jpg