what intake man should i use the si or dx.. or is it worth make my own intake
0
Itb's
Started by rollz87civic, Oct 26 2006 01:25 AM
6 replies to this topic
#1
Posted 26 October 2006 - 01:25 AM
#2
Posted 26 October 2006 - 07:46 AM
ITB's from TWM Induction or the like will require a dual sideraft carb style manifold. They just don't make the cool style, like the Bseries ones, for our motors. They are expensive!
http://www.twminduct...leBody2900.html
If you get motorcycle ITBs, you can chop and jerry rig a stock manifold (CDM carb manis are the best for this) or make your own manifold using a chopped off DX intake flange and some aluminum tubing. They are pretty damn cheap! Honda CBR ITBs are on ebay all the time for 100-200 bucks.
http://www.twminduct...leBody2900.html
If you get motorcycle ITBs, you can chop and jerry rig a stock manifold (CDM carb manis are the best for this) or make your own manifold using a chopped off DX intake flange and some aluminum tubing. They are pretty damn cheap! Honda CBR ITBs are on ebay all the time for 100-200 bucks.
Edited by CRXfanatic, 26 October 2006 - 07:51 AM.
"If Honda does not race there is no Honda." -Soichiro Honda
#3
Posted 26 October 2006 - 12:33 PM
QUOTE (CRXfanatic @ Oct 26 2006, 07:46 AM)
ITB's from TWM Induction or the like will require a dual sideraft carb style manifold.
There's also a British company that makes DCOE spec ITBs, so same manifold.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#4
Posted 26 October 2006 - 10:35 PM
#5
Posted 31 October 2006 - 04:38 PM
Ok so which ones could you use with a 2nd gen ZC?
www.implicit-autosports.com - Proud Distributors of Monkeyz-Tek Performance Parts
#6
Posted 31 October 2006 - 04:47 PM
QUOTE (IfTakumiDroveACRX @ Oct 31 2006, 04:38 PM)
Ok so which ones could you use with a 2nd gen ZC?
You pretty much have to use the one made by Pierce but a number of other firms made them like Mugen.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#7
Posted 31 October 2006 - 05:20 PM
QUOTE (Omega Mugen @ Oct 31 2006, 04:47 PM)
You pretty much have to use the one made by Pierce but a number of other firms made them like Mugen.
any links there mister? oh and thanks!
www.implicit-autosports.com - Proud Distributors of Monkeyz-Tek Performance Parts