This weekend I'm tear'n out my stock exhaust system and removing my cat checking things out, I was thinking of whipping up a 2.25 304 exhaust while I have the access to a bender. I'd like a decent header to go with it who makes one? (This car is driven on the street, but not a daily driver, so full race is ok, and so is loud as hell =D)
I've searched around and saw a Pacesetter, but from what I heard in Focus land, I might as well go hang myself if I buy one. But who knows the one for the CRX may be built right. Its definitely cheap which is a plus.
Thanks,
-ghost[iLs]
1
1g Header, Who Makes A Good One?
Started by ghostils, Jul 28 2005 11:55 AM
12 replies to this topic
#1
Posted 28 July 2005 - 11:55 AM
#2
Posted 28 July 2005 - 12:09 PM
QUOTE (ghostils @ Jul 28 2005, 10:55 AM)
This weekend I'm tear'n out my stock exhaust system and removing my cat checking things out, I was thinking of whipping up a 2.25 304 exhaust while I have the access to a bender. I'd like a decent header to go with it who makes one? (This car is driven on the street, but not a daily driver, so full race is ok, and so is loud as hell =D)
I've searched around and saw a Pacesetter, but from what I heard in Focus land, I might as well go hang myself if I buy one. But who knows the one for the CRX may be built right. Its definitely cheap which is a plus.
Thanks,
-ghost[iLs]
I've searched around and saw a Pacesetter, but from what I heard in Focus land, I might as well go hang myself if I buy one. But who knows the one for the CRX may be built right. Its definitely cheap which is a plus.
Thanks,
-ghost[iLs]
If it were me, I would put fourth a little bit more cash, and pick up the DC sports the normally sound the best, and as far as quality its hard to beat them..
#3
Posted 28 July 2005 - 12:14 PM
I didn't realize they made one for the 1st gen Si's. Woot, I'll check them out.
Thanks,
-ghost[iLs]
Thanks,
-ghost[iLs]
#4
Posted 28 July 2005 - 12:36 PM
Yeah i probably wouldnt go with anyone but DC when it comes to a 1g header, or any header really. All depends on how much $$ your willing to let go.
86 crx
#5
Posted 28 July 2005 - 02:00 PM
good luck finding one from dc as they have been discontinued. however they show up the classified forum sometimes. i haven't heard anything bad about the chikara header.
goodluck.
scott
goodluck.
scott
"Why dont you just put a pussy on the front of that car? It takes more money than I do." - The Wife
vouch thread 1 2
vouch thread 1 2
QUOTE (kaymo @ Mar 2 2009, 02:23 PM) <{POST_SNAPBACK}>
sure its no ferrari, and its no pussy magnet
#6
Posted 28 July 2005 - 02:06 PM
QUOTE (calmoc9 @ Jul 28 2005, 01:00 PM)
good luck finding one from dc as they have been discontinued. however they show up the classified forum sometimes. i haven't heard anything bad about the chikara header.
goodluck.
scott
goodluck.
scott
Try this http://www.doctorimp..._sports_header/
#7
Posted 28 July 2005 - 02:28 PM
It would be interesting to see if they actually have any in stock. DC's website no longer lists them for our cars.
http://www.dcsports....headers_app.asp
Another source for a good 4-1 race header is the Walt Puckett designed header carried by OPM.
http://www.dcsports....headers_app.asp
Another source for a good 4-1 race header is the Walt Puckett designed header carried by OPM.
2011 SCCA H-Production National Champion
#8
Posted 28 July 2005 - 08:19 PM
#9
Posted 28 July 2005 - 09:54 PM
#10
Posted 28 July 2005 - 10:07 PM
QUOTE (ian86crxhf @ Jul 28 2005, 09:54 PM)
do the same headers work on the hf model
yes but you'll need an Si oil pan.
93 Toyota Previa: Mid Engine, AWD people mover.
#11
Posted 28 July 2005 - 10:42 PM
Where could you find a good header for the PE3 (CDM carb'd head)? Or would it have to be a custom job?
#12
Posted 28 July 2005 - 10:45 PM
there all the same(1g/3g headers) you just need the Si oil pan for some
QUOTE (Ghost-One @ Jun 22 2004, 06:08 PM)
They got that engine out withtheir mighty facial hair cant you see
Team BUrnOUt Member # 3
#13
Posted 28 July 2005 - 10:52 PM
QUOTE (84 Hoopty @ Jul 28 2005, 11:45 PM)
there all the same(1g/3g headers) you just need the Si oil pan for some
Sweet, thanks. I guess that the products are just shown with a universal picture on a lot of the sites.