i just bought the so called "t3" out of a sasb, but how do you know if its the t3?
i know it says garrett and airresearch... i also thought it was suppose to be water cooled, but doesn't look like it is.
does any one know what the hose that is attached to the turbo is?(not vac hose from waste gate, not any oil line, i was told its not water either?)
1
What Turbo Is This?
Started by panda, Mar 16 2005 07:55 PM
6 replies to this topic
#1
Posted 16 March 2005 - 07:55 PM
#2
Posted 16 March 2005 - 08:04 PM
Check for the #'s .42 on the cold side and .48 on the hot side the lines are they rubber or metal?
There can only be 4 ones, water inlet/outlet and oil inlet/outlet.
There can only be 4 ones, water inlet/outlet and oil inlet/outlet.
Edited by CRXdan, 16 March 2005 - 08:04 PM.
90 crx si
13.17@113 street tires low boost
86 samurai g16 turbo
13.17@113 street tires low boost
86 samurai g16 turbo
#3
Posted 16 March 2005 - 08:05 PM
i just read the code ... it says DH2/4 GARRETT M4?
any one know the code?
also where would i tap for the oil line?
any one know the code?
also where would i tap for the oil line?
#4
Posted 16 March 2005 - 08:08 PM
the lines are rubber not metal... it says m4? its also connected to the cold side of the turbo.. on the actual "housing" i think.
Edited by panda, 16 March 2005 - 08:08 PM.
#5
Posted 16 March 2005 - 08:14 PM
sounds like the eirly saab t3 non watercooled turbo. pics would help.
Sean
Sean
#6
Posted 17 March 2005 - 06:14 PM
i think you are right, its probably an older turbo... still spins nice and smooth!
its kind of faced weird but i can make it work.
does the oil line hook up with the oil pressure sender(sensor)?
there are two other oil lines that are right next to that... would it work to just "T" one of those lines?
any one know what the line from the wastegate goes to, i heard intake, manifold, or any vacume line... which one is it?
still not sure what the line is that is attached to the turbo, could this be some sort of sensor or another vacume hose?
its kind of faced weird but i can make it work.
does the oil line hook up with the oil pressure sender(sensor)?
there are two other oil lines that are right next to that... would it work to just "T" one of those lines?
any one know what the line from the wastegate goes to, i heard intake, manifold, or any vacume line... which one is it?
still not sure what the line is that is attached to the turbo, could this be some sort of sensor or another vacume hose?
#7
Posted 17 March 2005 - 07:07 PM
humm, well usually the wastegate is attached to a vacume line on the turbo compressor wheel. On the center carterage you should only have two lines. That is if its oil only.
Sean
Sean