mindlessracing

i am in need of a few things:

1g teg: manual transmission

need:

*passenger side mount
*shift linkage (just the one that bolts to the tranmission back to the shifter have the other)
*shifter
*complete spindles
*half shaft
* both axles

let me know what you have, easiest way is just to email me
[email protected]

can paypal money or send money order. shipping will be to a business addy 57793

_________________________________________________________________________
my roommate is doing a fully drag 1g hf crx. i will post pics later on it, it will have a d15 (newer style) and zc trans in it with 14b turbo. trying to do this on the cheap side but it is getting some cool stuff, 6 point roll bar, fuel cell, obd1 wiring harness, etc.

thanks for your help.

have some extra stuff i should get rid of, if you want pics email me and i will get some the items; paypal accepted/money orders accepted, everything is priced without shipping unless specified. shipped from 57793. check my feedback on here or on ebay under mindlessracing

B16A3 complete engine minus header, 70,000 miles, obd1 ditzy, intake manifold, injectors, throttle body, vtec solinoid, head/ block/ pan/ complete running

$750 (can arrange shipping for descent price)

Y1 cable b series trans, needs one axle seal, was told shifted good but never tried
$300

avid shift linkage for ef to b series swap new
$100

obd0-obd1 conversion harness new with instructions
$65

F1 6 puck sprung clutch and F1 lightweight flywheel new in box (2g teg cable trans)
$265

H22 fidanza flywheel used but good shape needs resurfaced
$50

H22 vtec manual 5 speed trans, aftermarket lsd, shifts great
$650

92-96 prelude shift linkage with shifter (good for H22/H23/F22 swaps)
$90

JDM H22 head, complete with retainers, cams, springs, etc, 30,000 miles, no ditzy or vtec solenoid, valve cover included, ready to be put on a F22 block
$200

H23 block, 150,000 miles, compression was excellent (180psi across) with oem H23 honda headgasket
$200

1g teg cable 5 speed trans (motor said ZC) shifts good 80,000 miles
$250

Nippon low compression turbo pistons, new with rings, wrist pins, stock d series bore,
$150

parting out a 2G teg.

what is gone:
rear disc set up
motor
trans
ecu
wiring
seats

was rolled. what is good on the body is,
taillights ok
rear spoiler
rear hatch
dr headlight
rear bumper
interior pieces (black)
front hubs
gauge cluster
master cylinder
side trim pieces

i know not very much of this stuff can transfer over to the 3g civic/1g crx but a lot of us are always working on more than one car at a time. lol. pm me for pics or with offers on stuff.

hey all,
i need the piece below the tails for my 86 hf crx. good shape please. shipped to 57793 let me know what you have. thanks. dustin

hey all,
my room mate is in need of the front header panel for his 86 si hatch. the kid before him welded it to the hood and did a crappy ass job. we are repainting it and just need the header panel for the flush mount lights. let me know what you have and how much. shipping is to 57793

email is [email protected]
phone is 605-641-9106

thanks. dustin