13 replies to this topic

[rosendo192000]

do u guys think that the “Complete Custom Axles Complete Axles for the B-Series Swaps “ off hasport for 399 is worth it (does anyone know if they fit nicely into the 86-89knuckles and hubs .
thanxs
and do u think if they come with the 86-89 cv joints look here
i tryed emailing them but yet no answer.

Edited by rosendo192000, 24 March 2003 - 09:56 PM.

[rpr]

I think they are shafts only, but I'm not sure. Call them, they do answer the phone.

[steve0z]

goto place racing that is where i got mine...i forgot how much they were but it was everything for like 400? but call them they have them in stock make sure that they are the right ones though

[rosendo192000]

hey a steve i have a question about the Intermediate shaft it saids that i must use a 90 Intermediate shaft , but my question is can i use a 93 , im guess it can be the same 90-93
anyones replay would be great
thanxs

Edited by rosendo192000, 25 March 2003 - 06:09 PM.

[rosendo192000]

one quick question for does with a b swap , im about to buy the rear mount from Honda does anyone have the product number or what to ask specific for .
thanxs

[steve0z]

the del sol mount...i think so

[badxmaru]

I just finished a HA Sport swap
their directions are decent for a 1st gen

i'd recommend getting their axles
they fit fine into 86-89 integra hubs

their swap is a little tight
you have to do a little banging for alternator clearance cause the motor barely squeaks in there

I'd also recommend their wiring harness, it saved me like at least a week of soldering.

their shift linkage is a good call too, fits perfect, but if you're not lazy like me you can get an integra linkage and cut it...

i'm still having issues with my accel cable play, too much on it

89 civic clutch BARELY fits tight, but's all happy.

lemme know if you need anything

[rosendo192000]

hey badxmaru one more question how about the "90 teg intermediate shaft " how come i cant use the one that came with the b16a .
oh one more question does anyone have any good resorces or pages i could go to .
thanxs
rosendo

[badxmaru]

i used the one that came with the motor
I have an extra one lying around actually
i'm not sure if it fits tho
I got the ones that came with the 89 axles
but I used the one that came with the engine
got the engine from Hmotorsonline.com
ask for Steve
tell him Alex Gong told you to go there
he can cut a good deal

[Disco Stu]

What I would recommend is going to a place called Raxles and getting custom axles made up. Basically, you tell them what you have (b16 in a first gen CRX) and they will make up the axles with the right inner and outer parts so it's 100% plug and play. No changing hubs. Axles run about $100US I think, though that may be just for the stocker ones, and they're brand new, not reman'd axles.

[rosendo192000]

hey i got my motor from hmonline too , i picked it up very nice people (im asking this becaues i want to drop my engine in today ) look at my pics

Edited by rosendo192000, 05 April 2003 - 11:03 AM.

[steve0z]

so how much are u actually spending?

[NJMUGENCRX]

Axles run about $100US I think, though that may be just for the stocker ones, and they're brand new, not reman'd axles.

they sell a COMPLETE custom axle for that much? also ive heard of that company and if im not mistaken they make the axles for hasport.
-Roger

[rosendo192000]

so how much are u actually spending?

too much . iv already have the engine tranny ecu and the mounts the engine is already in the engine bay and about to order the axles