Interchangeable Body Parts?
#1
Posted 23 October 2014 - 07:29 AM
#2
Posted 23 October 2014 - 08:07 AM
I'll warn you that I have no experience in swapping body parts from these generation hondas, but I would imagine so. They might look different on the exterior, but usually their mounting style and locations will be the same. Just think that they didn't create a completely new chassis for each model (HF, DX, Si), just bolted different crap on.
#3
Posted 23 October 2014 - 12:46 PM
I would go for the 87 parts, I know that on the Civic hatch, the bumper 84-85 are different from 86-87 and I think the CRXs have similar change. The DX will likely be missing the lower lip on the front bumper that I think the HF had, but you should be able to move it to the DX bumper. I think for the CRX its the 86-87 Si with unique rocker panel covers. But, I'm no CRX pro.
Screech
------------------------
16 Ford RS (2.3l, DS)
84 Civic 2000S (B20Z2 2.0l, SMF)
#4
Posted 24 October 2014 - 08:27 PM
On CRX, they all interchange.
- Blow_through_85cvcc likes this
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#5
Posted 27 October 2014 - 05:54 AM
They will physically interchange on the Civic too, but are not the correct part. I just looked up a few and part numbers are different for a few years/trims I looked at. For safety standards on the 86-87 you should only use the 86-87 bumpers, as the 84-85 don't meet the safety requirements of the newer design. I've put the 86-87 design on my 84 for what every safety improvements it may provide.
84-85: 62511-SB2-960ZZ
86-87 Si: 62511-SB2-910ZZ
86-87 non-Si: 62511-SB2-950ZZ
Screech
------------------------
16 Ford RS (2.3l, DS)
84 Civic 2000S (B20Z2 2.0l, SMF)