Jump to content




Wtb: Crx Recessed Head Light Surrounds


  • You cannot reply to this topic
4 replies to this topic

#1
Domokunrex

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:u.k
    • Drives: mk1 86' crx 16v 16, 3G civic GT 85'
Recently purchased the recessed headlights just looking for the surrounding black plastic trim/bezels.
Would require shipping to the UK, thanks

#2
anjin

  • redlinefever
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:Perth, Western Australia
    • Drives: 83 crx - kakaburra,83 gen1 Noir, 87 EF7 Glasstop crx, 83 gen 1 rebuild replica mugen racecar
    • Image Gallery
    Garage View Garage

Ones with solid bottom or slotted bottom?  Don't care?  Have spares but as its perth Western Australia you may have better luck closer.

 

Ian


anjin aka Ian

"I can't believe it - Ive just been passed by a sh!tbox"

#3
Domokunrex

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:u.k
    • Drives: mk1 86' crx 16v 16, 3G civic GT 85'
To be honest I didn't know there was two types, what ones would you sell?

#4
billboard

  • Slowpoke
  • PipPip
    • Group: Members
Also its likely you will also need the metal mounting brackets? That is if you are doing the conversion? Also Headlight plug is not the same.

Also I think the corner lights are different? but I could be wrong about that one.

If you are doing the 86/87 to 84/85 recessed headlight conversion- you can find some info on my build thread. Its a wagon, but I am assuming crx/hatch/sedan are the same in regard to headlight conversion.

http://www.redpepper...ic=58271&page=2

Edited by billboard, 26 August 2016 - 06:03 PM.

Proud owner of 1987 Civic Wagon

#5
Domokunrex

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:u.k
    • Drives: mk1 86' crx 16v 16, 3G civic GT 85'
That's a cool looking wagon :)
Luckily the mounting brackets came with the lights, the plug is the same so no worries there but I will have to look into the corner lights.
Thanks for the info