I'm taking out my si total harness. How should I get that bad boy around the column? Were having trouble.
1
Hey Do You Get The Wire Harness Around The Column
Started by quick87crxsi, Oct 05 2005 06:50 AM
9 replies to this topic
#1
Posted 05 October 2005 - 06:50 AM
#2
Posted 05 October 2005 - 08:32 AM
Your talking about the small space above the steering column, right?
I did this once on a junkyard car. Just pull the harness through little by little and work one connector through at a time.
I did this once on a junkyard car. Just pull the harness through little by little and work one connector through at a time.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#3
Posted 05 October 2005 - 08:57 AM
take the pedal box out just takes 4 screws and you can take it loose without problems.
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#4
Posted 07 October 2005 - 05:01 PM
there are four bolts for the colum...... 4! stop being lazy and uscrew them. don't unscrew the coloum from the streering rack. just undo the 4 bolts.. hang it down. and there you go all the rooom you need....
chris
chris
no fighting in the war room!
Dr. Strangelove
Dr. Strangelove
#5
Posted 07 October 2005 - 06:51 PM
i just took the pedals out and it made it sooooooooo much easier.
SportInjectedClubvisit my myspace SAHCR Member
if your offended by anything i post, you need to seriously get a life
#6
Posted 07 October 2005 - 07:32 PM
hey does any body have a diagram of a 85 hach dx i just put in a wireharness that came with a pm5 acording to specs it from an 88-91 dx it came with the resister box and the 4 injectors even thou im not sure itll work i want to know if i could modify the harness to use my original taillights harness cause they gave me this one and i need the piece to the tail lights... and and the one that goes to the steering colum all the plugs are difrent to the (swich;signal;hazard;sand lights) sow i need some help here and if any body has done this mod ;im going ls vtec sow any help is great...
#7
Posted 07 October 2005 - 07:38 PM
QUOTE (a gasolina y que @ Oct 7 2005, 07:32 PM)
hey does any body have a diagram of a 85 hach dx i just put in a wireharness that came with a pm5 acording to specs it from an 88-91 dx it came with the resister box and the 4 injectors even thou im not sure itll work i want to know if i could modify the harness to use my original taillights harness cause they gave me this one and i need the piece to the tail lights... and and the one that goes to the steering colum all the plugs are difrent to the (swich;signal;hazard;sand lights) sow i need some help here and if any body has done this mod ;im going ls vtec sow any help is great...
if your going to run lsvtec why are you using a dx harness? it would be easier to run an si or hf harness since they are already mpfi.
SportInjectedClubvisit my myspace SAHCR Member
if your offended by anything i post, you need to seriously get a life
#8
Posted 07 October 2005 - 07:40 PM
i forgot to mention my 85 hach was carb. and anybody could pm me with some info or let me know wich complete harness would work for my ls vtec set up i know its been done and if anybody has done it out here in the orlando fl. area pm me ok...
#9
Posted 07 October 2005 - 07:50 PM
hey jeff440 i really dont know whats it from i just saw the 4 ijectors harness piece hoocked up to it and thought it would work cause the guy that gave it to me gave me the intake manifold with it and he had a 88 or 89 civic with the duaport carb in it but he sold the civic and gave me the harness and i forgot to ask him what it was from and havent seen him in over 2 months sow i really dont know cause according to some info i got pm5 is from 88-91 civic/crx dx ...