Jump to content




3g Civic/1g Crx Wagovan & Sedan Jdm/edm Parts


  • You cannot reply to this topic
193 replies to this topic

#16
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
I just had a look round in my boxes of civic stuff and found the following

One set of JDM corners for the 3G Hatch with all tabs and no cracks

the other side


ONE ONLY NZDM fully clear corner for the 3G Hatch with some cracks,chips and missing one mount tab
i can get some of these they are harder to find than the JDM corner lights.

and the back side


One set of NZDM Fully clear corners for the 3G sedan with all mounting tabs and a crack in the left hand side one the top one in the photo

back


One JDM SI center pannel with one crack by the left hand side reverse light

If you can find tails like this where you are you can save sending the tails and just have the center instead and save yourself some shipping if you want the JDM SI tail lights like the last post.


Thats all i can find for now but i know i have another complete set of JDM SI lights which i will find and some other goodies.

Cheers,
Alex

Edited by 3GCVC, 17 July 2006 - 12:44 AM.

80s Honda Specialist.

My FS thread JDM / EDM Parts

#17
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
Civic Shuttle EDM/NZDM Clear/frosted corners


Edited by 3GCVC, 17 July 2006 - 09:22 PM.

80s Honda Specialist.

My FS thread JDM / EDM Parts

#18
BigOrange

  • I pitty the fool aint got no honda
  • PipPipPipPipPip
    • Group: Members
    • Location:Richmond / Staunton, Virginia
    • Drives: 1985 CRX SI, 1985 Civic Wagon Turbo, 1971 n600, 1972 n600, 1972 n600, 1991 miata, 2002 turbo protege 5
    • Image Gallery
    Garage View Garage
^nice^
QUOTE (cbstdscott @ Feb 28 2010, 10:43 PM) <{POST_SNAPBACK}>
I suck

If a Hatch is Bread van, then what is a Wagon? A bread bus?
Wagoboost project, 7psi and giggling :)


Turbo Si Wagovan clan member

#19
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
just found these EDM/NZDM amber sidemarkers to go with the clear sidelights as in the above picture.

they are off a 3g hatch but should fit anything. i could provide a template for the hole size and shape in the fender if anyone wants them.

Edited by 3GCVC, 17 July 2006 - 10:05 PM.

80s Honda Specialist.

My FS thread JDM / EDM Parts

#20
jerfguy

  • Computer nerd
  • PipPipPipPipPip
    • Group: Contributing Member
    • Location:Denver, Co
    • Drives: Two tone black '85 CRX si: Kragen CAI + CF hood + D16a1 + rear seat + smoked corns + side markers + mudflaps.
    • Image Gallery
QUOTE (3GCVC @ Jul 17 2006, 08:03 PM)
just found these EDM/NZDM amber sidemarkers to go with the clear sidelights as in the above picture.

they are off a 3g hatch but should fit anything. i could provide a template for the hole size and shape in the fender if anyone wants them.

I want them. How much?
QUOTE (1stGenRex @ Sep 25 2006, 08:54 PM)
I'd piss on her

QUOTE (JEFFtheJ00la @ Jun 16 2006, 01:39 PM)
you guys figured out my secret. i sell my ass for cash. i shake it at the butt-nekkid every night. *puts head down in shame*

QUOTE (JEFFtheJ00la @ Sep 26 2006, 08:46 PM)
lol. i hate to admit it but i wanted to grab his titty, it looked that good.

#21
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
PM me with an offer thanks, i have no idea how much this stuff is worth
80s Honda Specialist.

My FS thread JDM / EDM Parts

#22
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
QUOTE (3GCVC @ Jul 18 2006, 12:40 AM)
PM me with an offer thanks, i have no idea how much this stuff is worth

I will give you $50 for everything you have pictured, plus I will pay shipping. to 75052
Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#23
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
QUOTE (badpenny @ Jul 18 2006, 11:42 PM)
I will give you $50 for everything you have pictured, plus I will pay shipping. to 75052


sent you a PM about this
80s Honda Specialist.

My FS thread JDM / EDM Parts

#24
DEIVIONCRX

  • Demon Of All Trades
  • PipPipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Oklahoma
    • Drives: 87 Civic Si, 88 Civic DX, 90 CRX DX, 80 Trans Am, 10 Fit Sport
    • Image Gallery
    Garage View Garage
let me know if you find the left and right pieces of the Si Tailights, and how much you would want for them, shipped to 73003 if possible

also the JDM 3g corners mine measured are 5" tall across the front edge, 7" from the bottom front to the back(i just wraped the tape measure around the curve), and the screw holes are 3.25" apart
Posted Image

#25
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
QUOTE (DEIVIONCRX @ Jul 19 2006, 07:40 PM)
let me know if you find the left and right pieces of the Si Tailights, and how much you would want for them, shipped to 73003 if possible

also the JDM 3g corners mine measured are 5" tall across the front edge, 7" from the bottom front to the back(i just wraped the tape measure around the curve), and the screw holes are 3.25" apart



all measure ments add up except the 5inch across the front edge which i assume you measured like in the photo below

also the distance from the two retaining clips that go into the headlights are this wide (not too good at reading inch's)


yes i can find the left and right sides of the SI tail lights do you just want the sides and not the center. they would probably be 50 dollars and shipping i spose they would weigh about a kg each making shipping around 35US

let me know if the measurements i provided line up with the USDM sidemarkers

Cheers,
Alex
80s Honda Specialist.

My FS thread JDM / EDM Parts

#26
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
UPDATE.
should be able to get ahold of this CRX rear spoiler.
MUGEN! complete with the badge even but i am told there is a crack in it somewhere i will look at it and post pics when i get it.

also whats up with that rear bumper it looks different anyone know what it is.

probably a few of these too if wanted
ZC Speedo clusters

Edited by 3GCVC, 19 July 2006 - 07:02 PM.

80s Honda Specialist.

My FS thread JDM / EDM Parts

#27
1stGENcrxLOVER

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:tampa Florida
    • Drives: white 2004 civic ex 2dr. black 2008 odyssey touring. blue 2007 ford f150 xl
how about Clear corner lights for a 85 crx and the sunroof bad and sun shade for a 3g civic

#28
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
QUOTE (1stGENcrxLOVER @ Jul 20 2006, 11:30 AM)
how about Clear corner lights for a 85 crx and the sunroof bad and sun shade for a 3g civic


cant do CRX clear corners we didnt get them over here.
what do you mean by the sunshade and sunroof bad(typo??)
80s Honda Specialist.

My FS thread JDM / EDM Parts

#29
Xipher

  • OMG! I posted THAT!?
  • PipPipPipPipPip
    • Group: Contributing Mod
    • Location:Sacramento, California
    • Drives: 1986 Honda CRX Si (project), 98' GMC K2500 BIG BLOCK 4WD, 2008 Honda Fit Sport, 2017 Chevrolet Volt
    Garage View Garage
I'd be all over it if you could get the clear/purpleish upper wing for the hatch on a 1G CRX...
Full of The Internets!
etmydst - ""...and since he was the hardest gangster in all of stockton they were to scared to go in his house so they drove by and said "slow down forest"..."
My Vouch Thread

#30
3GCVC

  • JankuYado Owner
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:New Zealand
    • Drives: 1986 Civic Hatchback E-AT Si ZC, 1986 Prelude 2.0Si B20A
QUOTE (Xipher @ Jul 20 2006, 06:09 PM)
I'd be all over it if you could get the clear/purpleish upper wing for the hatch on a 1G CRX...


you will be the first to know if i spot one and can get it
80s Honda Specialist.

My FS thread JDM / EDM Parts