7 replies to this topic

[Sandm849]

Just a quick question and wondering if anybody has had a car similar to mine at the track. I know its certainly not going to be close to my mustang (11.46 on 150 shot) but just curious. I have an 86 si, with a brown top zc, header, hi flow cat, hks muffler, cold air intake and the integra computer. Thanks guys

[timothymckay]

I remember Kurt did a 15.4 with a D16A3 (brown top Teg) in a hatch with 2 inch exhaust

Edited by timothymckay, 10 March 2004 - 06:39 PM.

[ZcSi CRX]

14.728 @92.05mph in forth gear on 13" slicks i/h/e an lowered stage 1 clucth masters.

[rexsk8er]

heh, just realizing how fast these cars are..... a turbo rsx ran 14's..... a sentra ser spec v ran 15's with i/h/e..... just takeing the time to laugh at the rich boys and thier slow cars (all of which probably payed 2x as much for thier stuff as we did)

Edited by rexsk8er, 11 March 2004 - 11:01 AM.

[CRXdan]

14.728 @92.05mph in forth gear on 13" slicks i/h/e an lowered stage 1 clucth masters.

That pretty insane!
Any other engine mods other than i/h/e? did u dyno it?
And got any larger pics of ur car

[Sandm849]

Hey if my car could run a high 14 i would be happy, ive got the intake, header, high flow cat, and stage 3 clutchmaster clutch. However Im just worried that my 205 45 16s won't hook up!! thanks for your info

[zc-hybrid]

D16a2 block (integra)

D16a9 ported/polished, skimmed 40thou' (1mm)

fitted 2.3 prelude throttle body (62mm)

home made cold intake

accord 2.2 litre (non vtec) injectors

stock integra cams

fuel pressure riser (set at 51psi)

supersprint 4-2-1 header / custom exhaust system (2 1/2"bore)

ecu (stock) integra

RR power figure = 152bhp @ 7349 rpm ~ 128lb/ft torque

managed a 14.5 @ 95 mph

road tyres/ stock clutch/ striped interior.

Edited by zc-hybrid, 16 March 2004 - 03:18 AM.

[balladeSports]

Thats Fast!!!!!!!!!!!!!!
my 1.5 12 valve crx Si musterd a 15.2 @ 91 mph a few years ago, intake, header, Lots of weight reduction. This was @ sea level on a cold day in Sept.