Jump to content




What Im Fit 87crx

Started by trevor72, Nov 01 2005 12:43 PM

  • You cannot reply to this topic
4 replies to this topic

#1
trevor72
Posted 01 November 2005 - 12:43 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Prince George, British Columbia, Canada
    • Drives: 92 civic Dx, 72 Mustang, 89 f250, and now, 87 CRX
    • Image Gallery
I'm very currious, and looking to find out all possible (and the cheaper the better) swap options for intake manifolds onto the stock D15A2 head. There's the obvious SI manifold, but will one from a brown top work? D16...???? what else?

Thanks

Edited by trevor72, 01 November 2005 - 12:44 PM.

#2
badpenny
Posted 01 November 2005 - 03:21 PM

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
QUOTE (trevor72 @ Nov 1 2005, 12:43 PM)
I'm very currious, and looking to find out all possible (and the cheaper the better) swap options for intake manifolds onto the stock D15A2 head.  There's the obvious SI manifold, but will one from a brown top work?  D16...???? what else?

Thanks

Gtpilot (I believe) made an adapter plate for this. This is what you need to do what you are talking about.
Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#3
trevor72
Posted 03 November 2005 - 03:14 AM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Prince George, British Columbia, Canada
    • Drives: 92 civic Dx, 72 Mustang, 89 f250, and now, 87 CRX
    • Image Gallery
will the si intake simply work with the carbed head or are the heads diff.?

#4
Omega Mugen
Posted 03 November 2005 - 10:03 AM

  • Dug Diggler
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Silver Spring, MD
    • Drives: 87 CRX w/Si motor, 86 Civic DX Hatch, 2001 Prelude
QUOTE (trevor72 @ Nov 3 2005, 03:14 AM)
will the si intake simply work with the carbed head or are the heads diff.?


ON a canadian car, it should simply work. The gaskets are the same between the Si and Dx.

Going to Hawaii? You need a Dune Buggy.

WTB: 14x8 or 9" Panasports or Watanabe RS.

WTB: 3g Civic hatch gauge cowl, brown.

 

WTB: ZC header--FOUND

#5
76kcfdeng
Posted 04 November 2005 - 05:50 PM

  • Go big or go home!
  • PipPipPip
    • Group: Contributing Member
    • Location:Wofford Heights, CA
    • Drives: 06 EVO,85crxSI,03ford f250 diesel,75 landcruiser, 76 280z race car,2006 nissan frontier
    • Image Gallery
    Garage View Garage
The d16a won't fit without an adapter, check my gallery for pics. The si mani will fit but but you will have to go to FI. Also you will need to put the inj notches in the head. You can see what i am talking about if you look at the adapter.
Glen
user posted image

user posted image
SportInjectedClub
Back to Swaps


  1. Red Pepper Racing
  2. → 1G Honda CRX/3G Honda Civic
  3. → Technical
  4. → Swaps
  5. Board rules