Wtb... Crx Stuff
#1
Posted 21 January 2017 - 11:58 AM
27mm torsion bars
sway bars
Coilovers
Pulleys
Clutch set
seats... race or Honda
seat rails
passenger fender
Updated 2/4
greensboro, nc
20 F150, 17 JGC Trailhawk, 90 DA STL Racecar, 92 DA Project, 92 DA parts car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car... I may have issues!
#2
Posted 21 January 2017 - 12:02 PM
#3
Posted 21 January 2017 - 09:24 PM
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#4
Posted 26 January 2017 - 06:44 AM
I have some torsion bars and assorted decent seats, with rails. Various colors. I will check on other items next week.
http://www.redpepper...ic=37758&page=3
Keith A. Edwards
Suffolk, VA
1.75 1st gen. CRXs
former ECHC H5 Champion
#5
Posted 27 January 2017 - 01:39 PM
I have a DC Header and the passenger fender. Shipping on the fender is going to be a bit pricey, but I have a box for it.
#6
Posted 05 February 2017 - 07:49 AM
greensboro, nc
20 F150, 17 JGC Trailhawk, 90 DA STL Racecar, 92 DA Project, 92 DA parts car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car... I may have issues!
#7
Posted 20 February 2017 - 02:13 AM
For:
1987 Honda Crx Si Engine
and Parts,
(Cheap Or At Low Cost)
________________________
Hello, Dustin here; from North GA.
I Desperately Need Some Parts for My Rex In Order To Keep From Having To Just Sell It I, After All I've Done So Far, Had Done So Far, (or Lack There Of.. Ha.. smh..)
To My : '87 Model. CRX Si. First Generation.
To Make Operable, & To Drive Again..
Currently I Need:
---------------
•A Fuel Rail, and/or Fuel Injectors. (preferably the whole rail as my fuel is leaking.)
•A Head with the Internals, (Pistons, Rods, Camshaft,) To : A Stock d16a3, Si Motor {Or A, Entire D Series Engine, That I Can Put In My Honda and It Run. ..While, if possible, Avoiding Pricey Engine Swaps, Requiring Me to Upgrade Any... Harnesses, Knuckles, Axles, Suspension, etc. Or Other Costly Swap Parts, That I Am Currently Not In A Near Enough Stable Financial Position To Be Able To Afford At This Time, Or Have The Time/Place To Do.
•Intake Manifold
*(I don't believe I need this to get my Honda running again, but I know it wouldn't hurt to get a new one with an IACV on it)*
Thanks
Respectfully,
-Dustin M.
6786771237
*Located in North Georgia*
Sent from my SM-G930T using Tapatalk
#8
Posted 20 February 2017 - 12:50 PM
I count 5 Si intake manifolds on my shelf with throttle bodies, fuel rails, but without injectors. I haven't inspected their IACVs, yet. $30 each + shipping. Fresh pictures are here https://drive.google...b0E?usp=sharing
Keith A. Edwards
Suffolk, VA
1.75 1st gen. CRXs
former ECHC H5 Champion
#9
Posted 08 September 2018 - 08:29 PM
Any interest in some EDM Taillights? They're in good shape, you can have them for free if you dont mind paying shipping costs. I need them gone and would like to see them put to use
Andrew
#10
Posted 08 September 2018 - 09:19 PM
Sent from my SM-G920V using Tapatalk
greensboro, nc
20 F150, 17 JGC Trailhawk, 90 DA STL Racecar, 92 DA Project, 92 DA parts car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car... I may have issues!