25 replies to this topic

[B@T "El Argentino"]

About three pounds less. At least that's how much less the 1.3 flywheel I have is from a standard flywheel. About 15lbs.

I believe they are the same as the HF's, can't say for sure.

And the two ring gears, 1.3 and 1.5, are identical both in diameter and gear mesh.

<{POST_SNAPBACK}>

If the ring gears are identical in diameter and gear mesh, does it mean that I can use the Si starter with the HF flywheel?

[jsgprod]

It would seem so. But I really don't know because when I took the starter off the car I just put it on the shelf with the rest of my spares.

This was over ten years ago, for all I know that starter could be in my race car right now.

Jay

[B@T "El Argentino"]

Does anybody know someone who does flywheel lightening and balancing?. I can't find anybody here in Indiana, they are all scare that the flywheel will explote and have a Cover Your Butt policy so they don't want to mess with it.

[Primerk5]

WAIT WAIT WAIT !!!!!!
I have a engine that belongs to WILQ and it has a aluminum flywheel on it AND ITS FOR SALE.!! Its out of an 85 SI Low milage engine too Im sure he'd sell seprate or together.

(prefably together get this thing out of my shed!!!!!!)

[B@T "El Argentino"]

WAIT WAIT WAIT !!!!!!
I have a engine that belongs to WILQ and it has a aluminum flywheel on it AND ITS FOR SALE.!! Its out of an 85 SI Low milage engine too Im sure he'd sell seprate or together.

(prefably together get this thing out of my shed!!!!!!)

<{POST_SNAPBACK}>

I'm really interested on that aluminum flywheel.
Check your PMs

[87Si]

I got part of it out of there when I bought that tranny. Thanks BTW for storing it for Wilq.. haha

Now, If I could only find the time to install it....

WAIT WAIT WAIT !!!!!!
I have a engine that belongs to WILQ and it has a aluminum flywheel on it AND ITS FOR SALE.!! Its out of an 85 SI Low milage engine too Im sure he'd sell seprate or together.

(prefably together get this thing out of my shed!!!!!!)

<{POST_SNAPBACK}>

[Primerk5]

YEAH!! some body get this engine!!!

I got part of it out of there when I bought that tranny.  Thanks BTW for storing it for Wilq.. haha

Now, If I could only find the time to install it....

WAIT WAIT WAIT !!!!!!
I have a engine that belongs to WILQ and it has a aluminum flywheel on it AND ITS FOR SALE.!! Its out of an 85 SI Low milage engine too Im sure he'd sell seprate or together.

(prefably together get this thing out of my shed!!!!!!)

<{POST_SNAPBACK}>

<{POST_SNAPBACK}>

[Omega Mugen]

YEAH!! some body get this engine!!!

I got part of it out of there when I bought that tranny.  Thanks BTW for storing it for Wilq.. haha

Now, If I could only find the time to install it....

WAIT WAIT WAIT !!!!!!
I have a engine that belongs to WILQ and it has a aluminum flywheel on it AND ITS FOR SALE.!! Its out of an 85 SI Low milage engine too Im sure he'd sell seprate or together.

(prefably together get this thing out of my shed!!!!!!)

<{POST_SNAPBACK}>

<{POST_SNAPBACK}>

<{POST_SNAPBACK}>

Is the flywheel for sale?

[ELITEX]

I though OPMmotorsports.com makes a lightened and a aluminum fly wheel for the d15a3.....

[-=Playboy=-]

Does anyone have a light weight flywheel for sale for a 86 crx si 1.5

<{POST_SNAPBACK}>

My ZC beast has a light flywheel

[ChrisF-dude]

That 1.5L from the 85 Si Wilq has with the flywheel was mine. Great motor and condition. The flywheel was made by Mueller Racing if I recall correctly and had a replacable friction surface. Motor had about 110k on it befroe the ZC install. No leaks.



Edit- The clutch and flywheel only had about 10-12k on it before being swapped for a ZC.

Edited by ChrisF-dude, 28 April 2005 - 06:35 PM.