As most of you know I purchased a bender, so I started off with playing on my personal ride, getting the layout for the strut bar you guys want so badly. Yes it is triangulated, yes it will work with my camber plates and likely with Davids as well. The bracket pushes out off the tower to allow for the camber plate to be mounted.
In the following photos you will see the first template I.E just messing around with bends to find what I like. The triangulation will be split on the final bar, with a dual plate mounting it to the fire wall, one plate on either side, to sandwich it for best strength. The mounts that will go under the camber plates, will be 3/16" thick mild or stainless depending on which bar you order. The brackets will be gusseted and shorter than what you see in the photo to bring the strength back towards the tower. The contour of the bar matches the replica DC one from EGAY which cleared the ZC and D16 without an issue.