Sign In
Create Account
Find content
Not Telling
QUOTE (kakabox @ Dec 31 2006, 04:44 AM) <{POST_SNAPBACK}>
OBX LSD Install continued...
The OBX diff bolt heads...
...interfered here:
...and here (the black painted areas need to be ground down):
So, I broke out the die grinder and shaved the ribs:
...then smoothed out the clearanced area w/a sanding roll:
No more interference!
Once all the grinding and sanding was done, the case required cleaning in the solvent tank:
Then, I replaced every oil seal w/new oem ones, cleaned and inspected every gear, syncro, and whatever...again w/lxndr's expert assistance, the trans was re-assembled:
The LSD install is done...ready for the 'Accord' 5th gear swap!
Cheers!
The OBX diff bolt heads...
...interfered here:
...and here (the black painted areas need to be ground down):
So, I broke out the die grinder and shaved the ribs:
...then smoothed out the clearanced area w/a sanding roll:
No more interference!
Once all the grinding and sanding was done, the case required cleaning in the solvent tank:
Then, I replaced every oil seal w/new oem ones, cleaned and inspected every gear, syncro, and whatever...again w/lxndr's expert assistance, the trans was re-assembled:
The LSD install is done...ready for the 'Accord' 5th gear swap!
Cheers!
do you know if this lsd will work in the L3 trannys for 88-91
