well looks like CRX 2.0 is underway i am going to begin pulling the head off this weekend a member here has decided to purchase it from me i hope he loces the way it pulls as much as i do now, i just hope my d16a1 works out as well as this build
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/icon_users.png)
![](https://www.redpepperracing.com/forums/uploads/profile/photo-thumb-8004.jpg?_r=1347115852)
87 Crx Carb To A 87 Crx Si Fi
Started by JEA86, Apr 30 2011 09:43 AM
50 replies to this topic
#46
Posted 27 July 2012 - 12:29 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
#47
Posted 03 August 2012 - 08:17 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
just to update my thread,
D15a3 sold in pieces to members here, All my EW parts are now gone,
The D16a1 Head got sent off for a port and polish yesterday,
Block goes in for new pistons, Bored out .020 and ARP rod bolts being installed.
Cams are getting sent to Delta on Monday for a 272 regrind.
D15a3 sold in pieces to members here, All my EW parts are now gone,
The D16a1 Head got sent off for a port and polish yesterday,
Block goes in for new pistons, Bored out .020 and ARP rod bolts being installed.
Cams are getting sent to Delta on Monday for a 272 regrind.
The Original CR-Z driver
#48
Posted 08 August 2012 - 10:54 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
to update this again,
Block is in the machine shop getting all the work done. head will arrive today at the place that is going to port and polish.
Scored a ZC intake manifold on here from JDM4drda (danny)
I am going to use a b18 LS throttle body on it and remove one of the bolts,
Now just waiting for all my parts to arrive.
Block is in the machine shop getting all the work done. head will arrive today at the place that is going to port and polish.
Scored a ZC intake manifold on here from JDM4drda (danny)
I am going to use a b18 LS throttle body on it and remove one of the bolts,
Now just waiting for all my parts to arrive.
The Original CR-Z driver
#49
Posted 13 September 2012 - 02:05 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
#50
Posted 19 October 2012 - 10:58 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
car is "on the road again"
having a few issues, Clutch slips when i get up into the higher RPM's not sure why or what happened to it,
The CRX Speedo cable is not staying put inside the teg transmission
The CRX throttle cable is not working correctly either....
and for some strange reason neither of my turn signal lights are working....
any input would be awesome
having a few issues, Clutch slips when i get up into the higher RPM's not sure why or what happened to it,
The CRX Speedo cable is not staying put inside the teg transmission
The CRX throttle cable is not working correctly either....
and for some strange reason neither of my turn signal lights are working....
any input would be awesome
The Original CR-Z driver
#51
Posted 20 October 2012 - 08:57 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
for the speedo cable have you checked to see if the retainer clip hasn't slipped off on the transmission side? i had one work its way out before
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.