37 replies to this topic

[funkmaster]

Ok, so my wife and I had a baby almost 2 years ago and my 87 has sat for most of that time. I have decided to either sell it as is, or part it out.

Its the orange 87si thats in my avatar. There are more pics in my gallery.
It runs right now, but needs a battery. It also smokes at WOT for an unknown reason. Could be valve seals, could be piston rings. I dont have the time or money to dump into a car I never drive. Also needs brake work, possibly jsut a good bleed. The car stops but the pedal is mushy. I recently installed an 85si prelude MC and since then have had problems with the braking system.

Note: this pic shows my old GSR wheels and non-ZC hood. I will take new pictures for serious buyers if they would like.


As is Ill take $3000 for the car, not a penny less. I can part it out for more than that I think, id just rather sell it in one piece. Heres what the car has:

Heres a rundown of whats done to the car :

Engine:
d16a1
bored .30 over
forged dome top pistons
Gude racing head package incuding:
-throttle body
-cams
-intake manifold
-ported & polished head
-titanium valve springs
DC sports 4-2-1 ceramic header
MSD 6al (not installed yet)
MSD Blaster 2 coil (not installed yet)
Unorthodox racing Crank Pulley (not installed yet)
Centerforce Dual Friction clutch
Dynomax hi-flow catalytic converter
Megs Racetip "muffler"
2.25" custom bent pipes

Suspension:
85 Prelude Master Cylinder
Earls SS brake hoses
87-89 integra brakes front & rear
Powerslot slotted rotors in front
Tokico Illuminas front
Tokico HP shocks rear
27.5mm torsion bars
Full polyurethane bushing kit
Lightspeed rear antiswaybar
OPM adjustable panhard bar
Eibach pro-kit springs

Interior:
Autopower 6pt roll cage
MOMO pedals
MOMO shiftknob
DC sports Short shifter
Custom aluminum door panels
140mph Speedo
Custom aluminum gauge overlay
Autometer oil pressure gauge
Autometer air/fuel ratio gauge
Simpson 5pt harness
stripped interior
Grant GT steering wheel
relocated battery

Exterior
1996 Ford mustang Bright Tangerine Paint
1 piece Carbon Fiber ZC style hood (will NOT come with the car for $3000, add another $500 for the hood if you want it)
95 integra LS Mesh wheels
Rear wiper and 3rd brake light removed
Rear bumper core removed
Battery Kill switch
fender mounted turn signals.

Car will also come with MONKEYZTEK 400# coilover kit.
I also have for sale:

BRAND NEW IN BOX centerfoce dual-friction clutch for d16a1.
comes with new CF throwout bearing
$250

Complete d16a1 engine/trans. from an 87 integra RS. needs a new clutch and some gaskets. Has about 140K miles on it, runs strong but leaks a little.
$500obo

89 integra engine, mostly complete has 74K original miles on it. It is mostly torn down ATM, so if theres specific parts youd like LMK. I have Cams, Intake mani, TB, etc etc.

Edited by funkmaster, 28 September 2006 - 01:33 PM.

[89teg_mike]

How would you go about parting it out? Would you wait for everypart to be spoken for before you part out?

mike

[funkmaster]

im gonna wait for a little while to see if anyone wants the whole car. I might put it on Ebay for one week to see if it sells there. After that Ill be parting it piece by piece as it sells.

Dibs will be in the order of who asks for them first, including PMs.

[RARECRX]

someone would be a fool not to pick up the whole car for $3000. anyone near him better pick this thing up.. BUMP for GREAT GHETTO LOW price..!!!

[Buford]

I've PMed him on my interest in the whole car.
I'm in Dayton and my son RedSIBaron goes to school at UC in Cinci. so we can go and inspect it.

[funkmaster]

PM replied, call made.

Here is a direct link to my gallery, if youd like to check out some interior and or engine bay pics.

My CRX Gallery

Edited by funkmaster, 28 September 2006 - 05:13 PM.

[RARECRX]

damnn I dont know about that used carbon one piece NON-zc hood for $500 x-tra..... they are only $475 shipped to your door new!! $350 for non-zc carbon fiber plus $125 shipping.. EDIT:: The ZC hood what you have I guess is $500 brand new shipped to your door. so a used one for $500 is kind of not a good deal..

here is the link...
http://www.redpepper...showtopic=16176

Edited by etmydst, 28 September 2006 - 05:37 PM.

[drag13honda]

if you part out i call dibs on lightspeed rear sway and dc short shifter

[funkmaster]

i understand that its about $500 for a new one to your door.
I want to keep it. I have it on my 85si currently, and that is where its staying unless someone buys the whole car and wants to make a deal.

Im not selling it if I part the car.

[tyrone]

id definantely like a few bits ff the car if parted out like the gude tb and intake mani

[Chaos325]

-titanium valve springs

Yeah, I'd be interested in ^

[shahriar35]

I want the whole Gude package

[Airgazm86]

I'd buy the Earl's brake lines if they'll fit a 3G.

[funkmaster]

well if I can sell the whole Gude package it will stay complete.
Otherwise the guys who called the individual parts can have dibs.
That is if the car doesnt sell whole.

Airgazm, the lines should fit your car no problem.

[shahriar35]

hey are those the real D16a1 header or are they just D series header? Basically what Im asking is that were they made for this exact engine or did you modify it to fit?