Jump to content




Hurricane + 100 Miles = Wet Wet Crx


  • You cannot reply to this topic
12 replies to this topic

#1
MakDiesel

  • She'll do 80 mph in 2nd gear and 45+ mpg, not simultaneously
  • PipPipPip
    • Group: Members
    • Location:Winston Salem, NC 27104
    • Drives: '89 CRX HF-Z1 ~ no carpet, no A/C, no muffler, earplugs optional '97 Hatch DX-Y5 ~ Roll cage & lean burn
    • Image Gallery
k, so Bonnie just flew through the East Coast and I had to drive 100 miles that day only to discover my sunroof leaks under heavy rain. It has never leaked otherwise. The drainage tubes are clear but the seal isn't the best so what I was wondering (so there's more rain outside than inside) is to completely remove the sunroof and replace it with a fiberglass sheet to be molded in, thus no more rain and 50 lbs less on top. I didn't really care for the sunroof in the first place, it only allowed the top of my head to burn on hot days, plus I've been itching for a reason to remove more 'extra' weight. Opinions? Mak
QUOTE (therealtime)
i see you did a world class rape on the rest of the vehicle lol.



#2
Airjockie

  • I LIKE RED (spray-paint)
  • PipPipPipPipPip
    • Group: 2013 Contributor


Sheetmetal is better than Fiberglass....well, at the time it was for me, I couldn't do fiberglass like I could sheetmetal at the time, but this was the quik and easy way.

Get a peice of nice sheet, measure everything, go a little wider than the hole your covering, brake the edges...as in curve them a little, then drill, and cleco it to the roof, and clean up everything, then run a bead of silicon around the panel on the inside and paint the interior of the metal....and pop rivit it on.

then paint the exterior, and voila...instant panel.

But the downfall is...everytime you close the door and the windows are up, the roof bangs and pops like thunder...doing it in fiberglass will just add unnesscary weight, unless you can make a sheet of carbonfiber, but you wont have the curve of the roof if you make it flat....
87 CRX SI, Wide body, and still not running...RB25DET?!?!?!
74 260Z....going to get rebuilt soon....
07 Subaru outback...Daily Driver...

#3
tjbizzo

  • pumice my corns
  • PipPipPipPip
    • Group: 2013 Contributor
    • Location:Raleigh, NC
    • Drives: 87 CRX Si Crapmobile
You could always remove the entire sunroof assembly, and then put only the sheet metal skin back in place with rivets, screws, caulk, whatever. It's pretty light, the right shape, the right color, and most importantly it's free! Anyone see a prob with that idea?
Posted Image

#4
Dan-O

Look back a few pages here, there's a thread about a custom carbon fiber sunroof insert that in the works.

#5
TAAGMANsCRXwithKYBs

  • Cleverly disguised as a responsible adult
  • PipPipPip
    • Group: Members
    • Location:S. F. bay area CA 94578
    • Drives: 87 CRX si (Jackson), 84 CRX DX(Jake), 87 CRX Si (Jack)RIP
    • Image Gallery
    Garage View Garage
QUOTE (Dan-O @ Aug 14 2004, 06:05 AM)
Look back a few pages here, there's a thread about a custom carbon fiber sunroof insert that in the works.

Thanks, Dan-o, that is what I was thinking... I brought that link over here from the Nor CA CRX club web page. I'll try and find it again, if it can't be searched from the archives.
TAAGMAN


There's only one basic difference between genius and stupidity... genius has its limits. - anonymous-

"My hovercraft is full of eels."
Hungarian-English dictionary skit - Monty Python -

#6
E-AT_me

  • go ahead. eat me..
  • PipPipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Strasburg, VA USA
    • Drives: 1986 Civic Si, 1991 Civic Si, 2001 Saab 9-3, 2007 Saab 9-3 Aero, 2003 Honda Pilot, 2009 Ducati Monster 696
    • Image Gallery
    Garage View Garage
well, glad you made it out alive in the first place!

hope all our florida members are oK!
1986 Civic Si; b16a is in.. just gotta get it running..
longest swap ever..... :(

#7
87crxdx

get a dx or hf headliner

#8
bigk3000

  • 1337 5h17
  • PipPipPipPipPip
    • Group: Members
    • Location:Langley BC Canada
    • Drives: 84 Civic Hatch 1500 S with D16A1 blacktop
    • Image Gallery
you guys suck... keep the sunroof and just fix the leak

sun roof kicks ass!
EXPLOSIVO!
84 Civic Hatchback 1500S-w/ d16 blacktop :P
86 Nissan 300zx GLL

user posted image

SportInjectedClub
user posted image

#9
C8V6C

I was questioning replacing mine as well.....

Ive been needing a sunroof for quite some time, and Im not missing much, considering its only a prop up

Id rather weld mine to the top of the roof though....and then qust sand it down to match, and paint the whole car black again

844b096b-9fda-4214-b621-217bc4a6dce1.jpg


#10
I3ackfire

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Spruce Grove, Ab
    • Drives: 88 Crx Si, 86 Crx Dx
Man thats really shitty to hear, being in a hurricane would freak me out so bad.

As for the sunroof I would just fix the seal and keep it. I love my sunroof on the 2G Crx to much, I would never get rid of it...it basically is my air conditioning smile.gif

#11
C8V6C

QUOTE (I3ackfire @ Aug 16 2004, 12:55 PM)
Man thats really shitty to hear, being in a hurricane would freak me out so bad.

As for the sunroof I would just fix the seal and keep it. I love my sunroof on the 2G Crx to much, I would never get rid of it...it basically is my air conditioning  smile.gif

I dunno if you knew, but the CRX's sunroofs are actually worth keeping

The 3rd hatches only prop up from the back....thats it.....

So we get like 2 in if that of opeinging....and it barely lets in a draft

844b096b-9fda-4214-b621-217bc4a6dce1.jpg


#12
AudioCra-Z

  • In the left lane
  • PipPipPip
    • Group: Members
    • Location:Bakersfield, CA
    • Drives: 07 Honda Fit
I have a sure fire way of not having those sunroof problems.....


I got a DX! biggrin.gif
Above all else, my WIFE I f33r the most!
Roses are #FF0000; Violets are #0000FF;

user posted image
RIP 86 CRX DX B16A

#13
C8V6C

Anything wrong with Lexan? Maybe ill do that, and just silicone the bottom, to try to keep out water

844b096b-9fda-4214-b621-217bc4a6dce1.jpg