1 reply to this topic

[panda]

i will be ordering a brown top zc this spring, but it doesn't come with a tranny.
will any tranny from the 86-89 teg fit on this motor or does it have to be an 86-87?
also, it doesn't come with ecu, axle or hub/knickles, will the teg parts all fit ok?
its going to cost about $690 +shipping, does that seem right ?
if all fits, ill be cruising by the end of april!
any help ...any one...

[boman]

i will be ordering a brown top zc this spring, but it doesn't come with a tranny.
will any tranny from the 86-89 teg fit on this motor or does it have to be an 86-87?
also, it doesn't come with ecu, axle or hub/knickles, will the teg parts all fit ok?
its going to cost about $690 +shipping, does that seem right ?
if all fits, ill be cruising by the end of april!
any help ...any one...

<{POST_SNAPBACK}>

Yes you can source the 1G teggy parts including the tranny.

$690 + shipping better be Canadian, otherwise this sounds steep. Also get them to take a
pic of the motor (valve cover) and check if the vc bolts are on the inside not outside of the vc.

Enjoy the power increase!

JAKOB