66 replies to this topic

[Tsunami_ZC]

Greetings RedPepperRacing.com

I have been in contact with LightSpeed Racing for sometime now , waiting on their arrival of Torsion Bars....

Finally they have come in .....a little later than expected , but they have arrived.

As of now here is the list of bars available:

18 sets > 27.5 MM Civic Torsion Bars
9 sets> 24.5 MM Civic Torsion Bars
5 sets> 27.5 MM Integra Torsion Bars

These are a direct fit Torsion Bar, they require no modifacation of Torque Tubes , or mounting points.

NEW LOWERED PRICE IS $225.00

He says they only have 5 sets of the Integra Bars , but if i can get him a number of more needed , he can have them made in 4 weeks, i know you guys are probably not concerned with DA1/DA3 Torsion Bars, but if you know anyone with a 86-89 Integra , more bars can be made.

This is a joint venture with our community over at www.g1teg.org , i am hoping we can get this deal moving .

My name is Steven , if you have any questions , please feel free to contact me via e-mail [email protected] , or by AIM Messanger: TsunamiITR MSN Messanger: tsunami_zc

http://www.g1teg.org...opic.php?t=6854

Thanks in Advance

This is a Pic of a 24.5 MM LightSpeed Bar next to the OEM one .....

I'll try and find a Pic of the 27.5 MM ......

Edited by Tsunami_ZC, 03 September 2003 - 03:47 PM.

[Rampage]

Well, If RPR is closing the group buy, then I am in for 24.5mm bars.

[Tsunami_ZC]

Well, If RPR is closing the group buy, then I am in for 24.5mm bars.

I will add you to the list

24.5 mm (Civic Bars)

Please PM me your full name.

We only need 5 more buyers to get them at a price of 249.00.

And the limit is not 10 for the Group Buy , LightSpeed just needs at least 10.

Seeing as the have 18 sets of 27.5 , and 9 sets of 24.5 for Civic

[nivek2002]

well i guess i can get the 27's instead of the 29's - great price, come on everyone, lets get it to 250$ !!!! Maybe all the guys in the group buy here could team up seeing as they already have theirs worked out comletely and stuff??

[Tsunami_ZC]

well i guess i can get the 27's instead of the 29's  - great price, come on everyone, lets get it to 250$ !!!! Maybe all the guys in the group buy here could team up seeing as they already have theirs worked out comletely and stuff??

Awesome ..Thanks , please PM me your name , and size needed.

[nivek2002]

ok i will - i just hope this isnt hurting anyone elses feelings, i know people did some hard work getting together our GB, lets all just work together!

[Ghost-One]

Mr Buckets says: whats shipping going to be like????

[Tsunami_ZC]

Mr Buckets says: whats shipping going to be like????

Tell Mr. Buckets to give me about 5 minutes ....i'll find out .


:calling LightSpeed:

[gtpilot]

Mr Buckets says: whats shipping going to be like????

God you crack me up Ghost-One!

Kirk

[nivek2002]

you really should keep Mr. Buckets away from the ash tray, he will get adicted

[Tsunami_ZC]

Ok , just got off the phone with LightSpeed , he said it will vary on specific Area but to Canada he has seen shipping prices range from 25-30

He might be able to get a cheaper rate as long as he designates the parts for a "vintage vehicle"

to those in the US , he said he usually sees an average of under 20.00

I will push a bit to see if he can get a starting price of under 249.00 ...just so we can keep it close to 250 after shipping. Cant promise anything as of yet, but i will try.


~Tell Mr Buckets not to poop on my hood just yet~

[Rampage]

NICE! I was expecting it to be a lot more, so that is cool, and if we can get it to 250US after shipping.....ohh, I am getting way too excited, but Mr. Buckets always puts me back in line

Anyone laughing at vintage vechicles, don't, our cars will be in another 7 years or so....

[Tsunami_ZC]

Ok Guys ...heres the current list....

~www.g1teg.org~ G1 Integra List Filled
#1 Scott (27.5mm) [DA3]
#2 Victor (27.5mm) [DA3]
#3 Jesse (27.5mm) [DA3]
#4 Dana (27.5mm) [DA3]
#5 Christopher (27.55mm) [DA3]

~www.redpepperracing.com~
#1 Mark (24.5mm) [Civic]
#2 Nivek2002 (27.5mm) [Civic]
#3 bryman10 (24.5mm) [Civic] (unconfirmed need full name)
#4 instigatorcrx (24.5mm) [Civic] (unconfirmed need full name)
#5 -----Open------


We only need 3 more spots to start at a price of 249.00. Looking good so far.

:List Updated:

Edited by Tsunami_ZC, 28 August 2003 - 12:47 PM.

[Rampage]

Hey, Nivek2002, you are getting 27.5mm bars? can I ask why?

[nivek2002]

well i wanted 29's on the RPR group buy, but for the price these are fine - i figure, these are for my AutoX only crx so i dont care about too stiff, and if im paying this much might as well get the most for my money.