2 replies to this topic

[sol2hatch]

Hey, I am putting in a d16a1 from a 1991 CRX Si, and putting it into a 1985 HF CRX. I know this is not a recommended swap, so dont bother telling me to get something else, cause I am almost done. I just need to know what axles I can use. I have the axles from the 91 rex, but they are a little too long. Will axles from a 1g civic/rex work?

EDIT: sorry, its a d16a6, not an a1

Edited by sol2hatch, 26 July 2006 - 12:42 AM.

[xips(86CRXSI)]

Hey, I am putting in a d16a1 from a 1991 CRX Si, and putting it into a 1985 HF CRX. I know this is not a recommended swap, so dont bother telling me to get something else, cause I am almost done. I just need to know what axles I can use. I have the axles from the 91 rex, but they are a little too long. Will axles from a 1g civic/rex work?

EDIT: sorry, its a d16a6, not an a1

<{POST_SNAPBACK}>

soho engine?

[crazi-85crx]

talk with RPR, he's done i before. you should need to use the 2gen crx axles with the hubs from that car too, or something like that.

edit:
you might find the answer here
http://www.redpepper...topic=20384&hl=