I am looking for a couple of stock OEM 1984-84 Honda Civic or CRX clutch discs. I do not need the entire clutch assembly just the disc. Please let me know if you have one available and a price.
Thanks,
Ken
0
Wtb 84-87 Oem Honda Civic/crx Clutch Disk
Started by RACER86, Jan 12 2013 09:47 PM
7 replies to this topic
#1
Posted 12 January 2013 - 09:47 PM
#2
Posted 13 January 2013 - 10:24 AM
#3
Posted 13 January 2013 - 10:58 AM
I am looking for OEM 84-87 disc to get the hubs from. I race a Honda Civic in the GTL category in the SCCA and am trying to modify some Tilton or Quartermaster clutch disc to work on the Honda shaft spline. These competition clutch manufacturers use a Toyota spline design on their disc and while it fits a Honda hub they wear out quicker.
Ken
Ken
#4
Posted 13 January 2013 - 12:42 PM
Arnt they sill available from Honda? Call your local dealer...
"for all your pre-1988 Honda restoration needs 206-940-8173"
"vouch thread"
http://www.redpepper...l=&fromsearch=1
1g, 2g, 3g Civic
1g CRX
1g Integra
1g, 2g, 3g Accord
1g, 2g, 3g Prelude
cars, parts, collectibles and more!
http://www.nwclassichonda.com
#5
Posted 13 January 2013 - 02:27 PM
No, Honda no longer makes the 84-87 model clutch disc. They are all after market disc and while these are correct splines they are 4 spring disc rather than Oem 5 spring. As a result the hubs are too small for me to drill for six rivets to attach to the competition disc. The stock OEM disc are large enough to do this with.
Again anyone with the OEM 84-87 Honda Civic/CRX 5 spring disc I would like to purchase.
Ken
Again anyone with the OEM 84-87 Honda Civic/CRX 5 spring disc I would like to purchase.
Ken
#6
Posted 14 January 2013 - 09:28 AM
Maybe a dumb question, but would you reuse old ones or would the springs be worn out too much for your racing. Probably easier to find a scrapped one off a tranny.
Keepin' it OEM
#7
Posted 14 January 2013 - 10:53 AM
Maybe a dumb question, but would you reuse old ones or would the springs be worn out too much for your racing. Probably easier to find a scrapped one off a tranny.
My parts car still has the factory clutch in it. If your interested in it let me know via PM. I live in Raleigh NC.
#8
Posted 14 January 2013 - 04:13 PM
What wrong with an oem replacement Excedy or something? They are all made by Daikin I believe which is who made the factory ones for Honda.
"for all your pre-1988 Honda restoration needs 206-940-8173"
"vouch thread"
http://www.redpepper...l=&fromsearch=1
1g, 2g, 3g Civic
1g CRX
1g Integra
1g, 2g, 3g Accord
1g, 2g, 3g Prelude
cars, parts, collectibles and more!
http://www.nwclassichonda.com