The only differences in the 88-89, and 90-91's and then the Base models came without a tach.
3
Ef Guage Cluster Swap
Started by Rampage, Aug 10 2009 12:54 AM
20 replies to this topic
#16
Posted 12 August 2009 - 12:23 PM
#17
Posted 13 March 2010 - 12:04 PM
Why not just do this...
http://rallybeater.c...r-gaugevss.html
I did, but am not sure if it's working.
My Black Top ran well with no codes, or PGM-FI light upon the swap being completed, I just did this because it seemed like a pretty neat project, and I preferred white guages for a fresher look in the dash.
http://rallybeater.c...r-gaugevss.html
I did, but am not sure if it's working.
My Black Top ran well with no codes, or PGM-FI light upon the swap being completed, I just did this because it seemed like a pretty neat project, and I preferred white guages for a fresher look in the dash.
#18
Posted 13 March 2010 - 12:44 PM
#19
Posted 13 March 2010 - 02:26 PM
QUOTE (DEIVIONCRX @ Mar 13 2010, 09:44 AM) <{POST_SNAPBACK}>
I did the HF VSS swap in my LS swap, but the speedo is off by anywhere from 10-15mph.
You know what?
I didn't check to see if my speedo is off, so I'm going to go out, and fire up the car, and the GPS, then see. If it is off, then out comes the first gen Integra VSS, but am still keeping the white on white guages.
Good of you to mention.
#20
Posted 25 January 2012 - 03:34 PM
Ingenious! Love this solution! I would make brackets instead of the shoptowel though but it works. Also sorry to bring new life to an old thread, but Rampage, in Canada do you guys count by km or miles? I noticed your speedo went to 200 but then saw it was kph. Also thought I would post that the UK (United Kingdom) EDM versions go to 150 mph and have a 8,000 RPM redline tach, which is way better (IMO) than the USDM 125 mph/6,500 RPM redline tach. Here's one listed by veetec1 on ebay:
UK EDM 90-91 SI Speedo Cluster
UK EDM 90-91 SI Speedo Cluster