Cheddajsauto Spherical Adjustable Panhard...
chedda_j
30 Oct 2010
QUOTE (DEIVIONCRX @ Oct 28 2010, 07:42 AM) <{POST_SNAPBACK}>
Any chance i could have this by November 12th? If not don't worry, but Ive got a back to back 2 day event 13th and 14th.
Im supposed to get my left hand tap coming in this week, but if i ship it out even monday i doubt it will be there in 10 days...sorry.
Not to everyone that they should all be done this next week.
chedda_j
13 Feb 2011
For those who have purchased my panhard bars, and had any issues with fitment please say so. I am now selling with the kits Poly washeres and Poly inserts to eliminate any chance of rod end movement. If your aluminum ones have any play, please say so and you will get a free Poly Kit sent to you.
DEIVIONCRX
16 Mar 2011
I had a little bit of a bitch getting the rod end on the axle side stub, but it was just a little rusty, i ended up just having to use the nut to press it down on the axle.
chedda_j
17 Mar 2011
QUOTE (DEIVIONCRX @ Mar 16 2011, 12:32 PM) <{POST_SNAPBACK}>
I had a little bit of a bitch getting the rod end on the axle side stub, but it was just a little rusty, i ended up just having to use the nut to press it down on the axle.
Ya thats the problem with using old parts, especially something that has a no tollerance fit like the rod ends which are exactly 20mm. Im glad you didnt have a big problem, i would love to have a picture of your installed product to show that it didnt just fit in my car if at all possible. Are you driving the car and did it adjust to the extent that you hoped?
chedda_j
27 Mar 2011
Heres a new panhard bar just made for HONDAHOLIC out of switzerland. Also a bushing kit and shifter.
▼▼▼▼▼▼▼ Stole a picture for the thread, thank you. ▼▼▼▼▼▼▼
▼▼▼▼▼▼▼ Stole a picture for the thread, thank you. ▼▼▼▼▼▼▼
DEIVIONCRX
27 Mar 2011
Ive got 2 small pics of it insalled in my build thread, yea it went to the Autocross last week, did just fine. Ive got it adjusted almost perfect now.
PowerWheels86
02 Jul 2011
well looks like it's about that time for me to place an order for this... all i have left to get the basics of my suspension is this and my 27.5mm T-bars... :-/ i need it like crack!!
chedda_j
02 Jul 2011
QUOTE (PowerWheels86 @ Jul 2 2011, 05:41 AM) <{POST_SNAPBACK}>
well looks like it's about that time for me to place an order for this... all i have left to get the basics of my suspension is this and my 27.5mm T-bars... :-/ i need it like crack!!
Payment recieved, will be making yours withing a couple weeks, and shipped within three weeks.
chedda_j
07 Nov 2011
Two panhard bars completed for DWEND and J-Man, shipped out this week via UPS for qucik shipping from the states to avoid Custom times.
