heres some pics of my custom door panels,
i still have the template if anyone wants to make some or PAY me to make you some!
Funk
1
Pic Of My Custom Aluminum Door Panels
Started by funkmaster, Jun 19 2003 04:30 PM
20 replies to this topic
#1
Posted 19 June 2003 - 04:30 PM
#2
Posted 19 June 2003 - 07:39 PM
how come you did that? im guessing weight savings? looks pretty good tho. I have a similar thing done to my door panels. i removed the carpet type stuff below the speaker grills and had a peice of that diamond printed aluminum stuff cut to fit and i attached it with some allen key screws, i think its looks nice and have had alot of compliments.
Project E-AS Squad now underway
Olive drab
Flat Black
B-series
1st gen represent
Olive drab
Flat Black
B-series
1st gen represent
#3
Posted 19 June 2003 - 07:49 PM
i did it b/c the roll cage made it so the door wouldnt shut right with the bottom half of the door panel on there
So i figured i needed to cover it up with something rather than have giant gaping holes.
So i figured i needed to cover it up with something rather than have giant gaping holes.
#4
Posted 19 June 2003 - 11:19 PM
you should put aluminum where the fabric is on the upper part of the door, that would be cool, kinda make it match
#5
Posted 20 June 2003 - 03:45 PM
Wow I never thought about that , I have a bolt-in cage and might put it in ,so Yup, I may have to do that too.
Doodson
Doodson
#6
Posted 22 June 2003 - 11:21 AM
Funkmaster,
Cool panels.
your emergency brake needs to be tightened. start by tightening your rear drums and then take up the slack in the emergency brake so it only "clicks" a couple of times when you set the brake.
Scott
Cool panels.
your emergency brake needs to be tightened. start by tightening your rear drums and then take up the slack in the emergency brake so it only "clicks" a couple of times when you set the brake.
Scott
Form Follows Function
#7
Posted 22 June 2003 - 02:28 PM
that looks pretty good. I have something similar to that only the entire door is covered instead of just the bottom half, but I like your idea, it's pretty cool. on my other CRX I just have the top half of the panels with the gaping hole underneith maybe I should do something like that.
#8
Posted 24 June 2003 - 01:53 PM
#9
Posted 25 June 2003 - 06:24 AM
#10
Posted 25 June 2003 - 09:17 AM
Phat door!
My friend did kind of the same thing just make sure you don't kick it or hit it because it will dent up real easy.
My friend ended up replacing his with diamond plate it looks real cool.
My friend did kind of the same thing just make sure you don't kick it or hit it because it will dent up real easy.
My friend ended up replacing his with diamond plate it looks real cool.
#11
Posted 25 June 2003 - 10:19 AM
QUOTE (skelly_snake @ Jun 25 2003, 04:24 AM)
Doodson, your cage should clear OK.
Mine does.
Mine does.
Ya, I looked at it and it will clear with no problem
THANX
Doodson
#12
Posted 16 January 2006 - 08:31 PM
#13
Posted 16 January 2006 - 08:37 PM
#14
Posted 16 January 2006 - 08:42 PM
Thanks.
I just wanted to have a little look, i want to do something custom to my doors but i dont know what yet.
I just wanted to have a little look, i want to do something custom to my doors but i dont know what yet.
Edited by chedda_j, 16 January 2006 - 08:42 PM.