Jump to content




Lots Of Stuff For Sale


  • You cannot reply to this topic
19 replies to this topic

#16
mrvonwizzle

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 87 civic dx hatch
bump


Do you have anything I don't want?

#17
squareback

  • Nothing's stock at this house . . .
  • PipPipPipPipPip
    • Group: Contributing Member
    • Location:Kansas
    • Drives: 90 Civic Si, 89 Civic Si, 16 Pilot, 13 Ruckus
    • Image Gallery
Apparently not. biggrin.gif


QUOTE (cornboy @ Dec 5 2005, 06:08 PM)
Would the flywheel/clutch stuff be good for a CSP autocross car?  I would want to put them in my 86 Civic Si.  That cam seems pretty strong.  It wouldn't work too good on a street car, huh?  Thanks.

--Todd



That cam is VERY strong. That combined with the intake/carbs made the engine absolutely scream. The carbs were awesome all over, but the cam didn't truly come alive till about 4000 RPM. It would be fantastic in a race/drag/autocross car, but I would not recommend this cam for a street car. You could use it, but it would idle kinda lumpy. Is the CSP car and the street car one in the same? If so, you have to use a stock cam for SP rules anyway.


Thanks for the support, guys! Might as well let someone use the good stuff that I can't anymore.

Mike
No power . . . no weight

#18
cornboy

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Iowa
    • Drives: 1986 Civic Si
QUOTE (squareback @ Dec 5 2005, 11:26 PM)
Apparently not.  biggrin.gif


QUOTE (cornboy @ Dec 5 2005, 06:08 PM)
Would the flywheel/clutch stuff be good for a CSP autocross car?  I would want to put them in my 86 Civic Si.  That cam seems pretty strong.  It wouldn't work too good on a street car, huh?  Thanks.

--Todd



That cam is VERY strong. That combined with the intake/carbs made the engine absolutely scream. The carbs were awesome all over, but the cam didn't truly come alive till about 4000 RPM. It would be fantastic in a race/drag/autocross car, but I would not recommend this cam for a street car. You could use it, but it would idle kinda lumpy. Is the CSP car and the street car one in the same? If so, you have to use a stock cam for SP rules anyway.


Thanks for the support, guys! Might as well let someone use the good stuff that I can't anymore.

Mike



No, the car that would be for CSP would only use the clutch and flywheel (that's both legal, right?). The cam question was more out of curiousity. I like your CRX. That's what I want to do some time. I want to put the Si drivetrain into a lighter car. I guess that would be pretty quick. My car has some rust, so I wouldn't use this car anyway.

--Todd

#19
squareback

  • Nothing's stock at this house . . .
  • PipPipPipPipPip
    • Group: Contributing Member
    • Location:Kansas
    • Drives: 90 Civic Si, 89 Civic Si, 16 Pilot, 13 Ruckus
    • Image Gallery
Just updated these items. There has to be interest in some of this. Racing weather will be here before you know it! Make some offers!

Mike
No power . . . no weight

#20
JDN14

how much are you looking to get for the OPM bar...i suck at making offers (and im probably too broke anyway...)

thanks!
93 Toyota Previa: Mid Engine, AWD people mover.