16 replies to this topic

[Zephyr]

Unfortunately it is not going to be anywhere near the price of the POS you can get from JC Whitney or Summit. Once it is developed they will be selling for around $450. As opposed to the Chikara you will not need to port out the exhaust ports to remove the excessive welds and it will have a 2.5" outlet. I will have it available in a couple configurations, flange or no flange on the outlet or with a bung for your oxygen sensor. I don't plan on having anything other then a 4 into 1 configuration made.

Zephyr

Edited by Zephyr, 19 January 2007 - 08:27 AM.

[Buford]

Ya need to ask all the racers what their needs are.

Depending on the desired RPM and torque band you use different primary tube lenghts and diameters.

Same with collector dimensions.