Hey guys, I am planning on building my 87 crx si. I already have a gsr engine and tranny out of my last car and am building it to handle 350-400 hp with a turbo. My question is what turbo manifold will fit under the header panel area?
Sent from my iPhone using Tapatalk
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/icon_users.png)
![](http://www.gravatar.com/avatar/f3bd0f52259b0ef0b54c3da4e066f81a?s=100&d=https%3A%2F%2Fwww.redpepperracing.com%2Fforums%2Fpublic%2Fstyle_images%2Fsolid_red323%2Fprofile%2Fdefault_large.png)
1St Gen Gsr Turbo Manifold
Started by camrenmarley, Sep 05 2017 11:47 PM
1 reply to this topic
#1
Posted 05 September 2017 - 11:47 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
#2
Posted 09 September 2018 - 03:53 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
I don't have any direct experience with gsr turbo in a 1G but you will need a half rad for sure and more than likely ditching a/c. theres not alot of room up front. would get the engine in and running then worry about finding a manifold.