ok I have an 86 Si and I wanted to know what all am I gonna need for the ZC Brown top swap also is this swap just as easy as swapping a ZC into an 88 Rex? How long am I looking to take with it on average? thanx.
0
Zc In 1g Rex
Started by S.C.A.R, Oct 31 2003 02:10 AM
3 replies to this topic
#1
Posted 31 October 2003 - 02:10 AM
#2
Posted 31 October 2003 - 04:06 AM
first off the whole swap can be done in a weekend if you have all the tools,supplies and parts you need.the swap is basically direct with few moifications. get a brown valve cover zc or an 86-87 integra engine to do the swap. use the us 86-87 integra tranny,intake manifold/tb (for zc) ,vacuume box,ecu,axles,clutch,engine harness,knuckle spindle assembly and anything else you can think of.you need to do some wiring mods but the rest is cake.
SportInjectedClub
#3
Posted 31 October 2003 - 11:47 AM
if you get the 86-7 ls manual tranny motor and ecu, there is no wiring trouble...maybe a few different connectors.
Tony Palumbo
'86 CRX Si ZC
'86 CRX Si ZC
#4
Posted 31 October 2003 - 06:21 PM
this is pretty much everything you need to know. its good for all 86 and 86 swaps. its what i used when i did my swap.
http://hybrid2.honda...ch/westech.html
http://hybrid2.honda...ch/westech.html
1986 Honda Civic CRX SI
86 D16A1 and BOOST!!!!
Soo Much Boost, Soo Little Time.
86 D16A1 and BOOST!!!!
Soo Much Boost, Soo Little Time.