Any chance we can get some new pictures?
5
Cool Little Part For My Crx I Made Today.
Started by Aren D., Feb 09 2005 07:37 PM
98 replies to this topic
#91
Posted 21 January 2006 - 02:21 AM
#92
Posted 21 January 2006 - 10:11 AM
can we get someone to make these??
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.
#93
Posted 21 January 2006 - 10:17 AM
QUOTE (staticchmbr @ Jan 21 2006, 08:11 AM)
can we get someone to make these??
i know a machine shop that would fab some up no problem. It would have to be a group buy. Id say 10 ppl. I need some diagrams and exact specs tho.
1.chedda_j
#94
Posted 21 January 2006 - 10:42 AM
ill def. buy one...what kindof price??
theres another thread about these with specs i think..but its waaaaaaaaaaaaaay back
theres another thread about these with specs i think..but its waaaaaaaaaaaaaay back
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.
#95
Posted 21 January 2006 - 10:52 AM
QUOTE (staticchmbr @ Jan 21 2006, 08:42 AM)
ill def. buy one...what kindof price??
theres another thread about these with specs i think..but its waaaaaaaaaaaaaay back
theres another thread about these with specs i think..but its waaaaaaaaaaaaaay back
Ya theres some specs but NO pictures. I need like a good drawn or Photoshop or CADD one. Well i was thinking, mild steel is cheap, prolly 50 bucks a set. Hopefully. Let me give them a call right now and ask them.
#96
Posted 21 January 2006 - 10:56 AM
QUOTE (chedda_j @ Jan 21 2006, 08:52 AM)
QUOTE (staticchmbr @ Jan 21 2006, 08:42 AM)
ill def. buy one...what kindof price??
theres another thread about these with specs i think..but its waaaaaaaaaaaaaay back
theres another thread about these with specs i think..but its waaaaaaaaaaaaaay back
Ya theres some specs but NO pictures. I need like a good drawn or Photoshop or CADD one. Well i was thinking, mild steel is cheap, prolly 50 bucks a set. Hopefully. Let me give them a call right now and ask them.
Reading from the last couple posts, it looks like there is only one locking plate. I need a good drawing to get an estimate.
#97
Posted 21 January 2006 - 12:30 PM
At one point on one of these threads I had offered to have them manufactured. Threw some figures around for cost as I was going to have them laser cut, professionally welded and powder coated. Then I got the flames as they were too expensive and that I didn't have the groups best interest in mind so I basically said, I'm outta here. Let someone else do it.
I did put in a small percentage in for my time and all the running around and gas expenses. But I guess we are to do all this for free for everyone. There comes a point when one or two favours is OK but the logistics and the time and effort have to have a price on it. We all have other lives and are busy.
There is my 2 cents and my rant about doing these things. If I do anything like this again a word to the wise. It will be money up front in a group buy. When the particular item is built then if someone begs out they forfeit their deposit. Unfortunately sometimes one has to take a bit of a harsh stance on their investment. Everyone wants but in the end only a few are really ready to commit. JS
I did put in a small percentage in for my time and all the running around and gas expenses. But I guess we are to do all this for free for everyone. There comes a point when one or two favours is OK but the logistics and the time and effort have to have a price on it. We all have other lives and are busy.
There is my 2 cents and my rant about doing these things. If I do anything like this again a word to the wise. It will be money up front in a group buy. When the particular item is built then if someone begs out they forfeit their deposit. Unfortunately sometimes one has to take a bit of a harsh stance on their investment. Everyone wants but in the end only a few are really ready to commit. JS
If you want one of these Logos send me a PM
Austin Mini Van with DOHC Honda HP
http://www.angelfire.com/droid/strudel
Honda reliability and power combined with Mini cachet and style.
#98
Posted 21 January 2006 - 05:51 PM
My issue with this is that if I post the design, and someone sells them and makes profit, why shouldn't I get a cut for designing it?
I design things for a living, I don't give my stuff to others to make money from.
I could post a drawing for it, but if someone was to start making them and selling them for profit I would be more than a little upset.
Can you see my point?
It's a simple design, use your imagination. You have to stop the internal rear axle torsion bar from moving. You have 2 options, weld it or make a plate to stop it. Figure it out........I did
Rob
PS......search my gallery if you plan to make one for personal use
I design things for a living, I don't give my stuff to others to make money from.
I could post a drawing for it, but if someone was to start making them and selling them for profit I would be more than a little upset.
Can you see my point?
It's a simple design, use your imagination. You have to stop the internal rear axle torsion bar from moving. You have 2 options, weld it or make a plate to stop it. Figure it out........I did
Rob
PS......search my gallery if you plan to make one for personal use
Must.....go......racing.......
#99
Posted 21 January 2006 - 05:59 PM
i found it . very creative, yet so simple.
Edited by crazi-85crx, 21 January 2006 - 06:00 PM.