Jump to content




86 Civic Hatch Si Part Out


  • You cannot reply to this topic
59 replies to this topic

#16
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx
QUOTE (RedRexDX @ Apr 20 2006, 10:16 AM)
i need the black mouldings on the opposite side please smile.gif




your pic is of a crx this is a civic i am parting out, the moldings are different i believe, unless i am wrong in which case i do have the moldings but i was going to leave them with the door,fenders, etc.

#17
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx
as for the fuel lines, head, and wiring harness.

fuel lines were trashed with the shell and i didnt save the fuel peices like fuel pump etc, the head is still on the motor which is an ew4 but i can pull it if you would like PM me about this, wiring harness? which piece? engine harness i assume, i am not sure if they are the same from the crx or civic sorry, but i do have it.

#18
1stGenRex

  • Easily Amused....
  • PipPipPipPipPipPip
    • Group: 2009 Contributing Member
i need the wiring harness for a swap, so IDK if i just need the engine harness or the whole thing...
1GRPhotography
MySpace
I'ma in the Carburetion Nation


#19
1GenAZrex

  • Slowpoke
  • PipPip
    • Group: Members
I need Interior windshield pillar parts, AC Compressor, interior hatch panels and carpet (black) rad fan swich, a/c blower motor ,nice set of door panels pls let me know
user posted imageuser posted imageuser posted imageuser posted imageuser posted image

#20
jbrad37

  • Slowpoke
  • PipPip
    • Group: Contributing Member
    • Location:Elk River - Mn
    • Drives: 86 Honda Civic si, 97 Infiniti Qx4, 03 Malibu
    • Image Gallery
Looking for calipers, rotors and pass side CV axle.
"No Please.........Let me drop everything and work on YOUR problem."

#21
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx
calipers, windshield panel covers, and combo switch sold.

Entire interior, head, injectors and fuel rail pending.

#22
Camsshaft

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Holland,MI
    • Drives: 90 fulldrag CRX/86sihatch/89toyotatruck
QUOTE (Gunny86 @ Apr 27 2006, 03:59 PM)
calipers, windshield panel covers, and combo switch sold.

Entire interior, head, injectors and fuel rail pending.

hey I'm in Holland, MI and need alot of interior stuff including rear seat. Also if u have clean right front fender and front bumper. Ther's other stuff I need as well but thought I'd ask if u have those first. lmk asap cuz I'm trying to find everything before I get ready to paint next week. thanks smile.gif

#23
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx
QUOTE (Camsshaft @ May 1 2006, 09:54 AM)
QUOTE (Gunny86 @ Apr 27 2006, 03:59 PM)
calipers, windshield panel covers, and combo switch sold.

Entire interior, head, injectors and fuel rail pending.

hey I'm in Holland, MI and need alot of interior stuff including rear seat. Also if u have clean right front fender and front bumper. Ther's other stuff I need as well but thought I'd ask if u have those first. lmk asap cuz I'm trying to find everything before I get ready to paint next week. thanks smile.gif



well most of the interior is still pending, but i do have the fender (passenger?) and bumper both are pretty clean i believe, not sure how i would ship the bumper but let me look into it, and i will get back to you asap on the exact condition of the parts. thanks!

oh yeah i do have pictures as well of those send me your email and i can get them to you.

#24
Diaz984

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Long Beach, CA
    • Drives: 86 CRX Si, 85 Corolla DX
    Garage View Garage
how much for the throttle body? and where are you located? smile.gif

#25
deadpool7372

  • Give me Peppers!
  • PipPip
    • Group: 2010 Contributing Member
    • Location:Lubbock, TX representing. Ya HeaRd!
Will you PM me if you have a good distributor?
Price + shipping to 79416.

Thanks!
QUOTE
Tom/RPR: You know you are hardcore when you remove the SEAT COVER!
Lubbock, TX representing. Ya HeaRd! :)

#26
Camsshaft

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Holland,MI
    • Drives: 90 fulldrag CRX/86sihatch/89toyotatruck
hey, I sent u an email about this already but I'm unsure if u got it. I'm retarded and actually need more than we origionally talked about. I need a mint drivers door, center console, under dash panel on drivers side, and the plastic that goes on the bottom of the door jams also. crazy! I might as well just buy the whole damn car from u!! any way lmk if u have that stuff too. thanks a bunch! smile.gif

#27
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx




here are pics of the sunroof and the small nick/impact crack

#28
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx
UPDATE.

Thanks alot to Camsshaft for coming all the way over from MI to pick up alot of stuff!

Sold so far,

Dizzy, hood, headliner, dash, doors, both passenger fenders, rear interior covers(All of them), Nose piece(right above the headlights), front bumper, calipers, windshield pillar covers, combo switch, center console, and alot of misc covers and panels.

Still have almost all the engine stuff, seats, rear bumper, all the glass(except doors) headlights taillights etc etc etc. I still have alot to go so keep the offers coming! thanks alot

#29
Gunny86

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Milwaukee, WI
    • Drives: 89 Civic sedan(daily) 89 Prelude 2.0SI, 89 Crx
BUMP! still have many good parts!! 2 hatches w/glass, full wiring harness, quarter glass, most motor components, some trim pieces! must go soon!

#30
juliansavino

is the head in good condition? pm me.
user posted image