Jump to content




How Big


  • You cannot reply to this topic
4 replies to this topic

#1
rollz87civic

  • VOOM VOOM NO VTEC!!!!!!!!!
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:SPRINGFELD,OREGON
    • Drives: 1987 civic sedan(sold) 1987 civic DX(sold) 1992 civic SI(sold) 1985 civic wagon 4wd(sold) 1986 civic std DD(Sold)1986 civic dx(sold)
    • Image Gallery
Well i'm going to do street bike carbs.I'm fed up wit the whole de'vac crap so i'm going street bike carbs.

What size carbs should i get?

How I'm i sopost to get vac for the idzzy if I go street bike carbs?


THANKS

ROY
SACHR member be hate for who you are not loved for who your not.

Posted Image
Member in the Carburetion Nation





RIP GLEN

#2
jay_1gen

  • Slowpoke
  • PipPip
    • Group: Members
QUOTE (rollz87civic @ Jul 27 2007, 03:41 AM) <{POST_SNAPBACK}>
Well i'm going to do street bike carbs.I'm fed up wit the whole de'vac crap so i'm going street bike carbs.

What size carbs should i get?

How I'm i sopost to get vac for the idzzy if I go street bike carbs?
THANKS

ROY


Send me your e-mail and I'll send you detailed pics of my CBR 900RR setup.

#3
Kurt

  • Slowpoke
  • PipPip
    • Group: Members
The carbs I use with the twin cam zc are 41mm from 1000cc yamaha r1. for the dizzy vac advance you can T off each runner with a small port and link all 4 into one tube that runs to you dizzy .

#4
rollz87civic

  • VOOM VOOM NO VTEC!!!!!!!!!
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:SPRINGFELD,OREGON
    • Drives: 1987 civic sedan(sold) 1987 civic DX(sold) 1992 civic SI(sold) 1985 civic wagon 4wd(sold) 1986 civic std DD(Sold)1986 civic dx(sold)
    • Image Gallery
^^ 1000cc carbs are a lil for a stock 1.5
SACHR member be hate for who you are not loved for who your not.

Posted Image
Member in the Carburetion Nation





RIP GLEN

#5
jay_1gen

  • Slowpoke
  • PipPip
    • Group: Members
Ok thats far from the truth they actually get more fuel and air then any FI system. They thing is it needs tuning, for mine I had to go to a 160 main jet and drill out my carb slids to allow them to open up faster and I'm only runing 900cc CV carbs.