I have seen a few photos scattered around the forum here of people that have DIY'd their own front lips.
Anyone know what other models / cars bumpers can be hacked and adapted to fit a 3rd gen? I'm happy for it to look ghetto, just want to make sure the general fit / width is okay before sourcing a bumper!
Photo examples welcomed
2
Ghetto Front Lips
Started by rakfint, Aug 25 2009 12:39 AM
30 replies to this topic
#1
Posted 25 August 2009 - 12:39 AM
#2
Posted 25 August 2009 - 01:47 AM
You can use a first generation Integra lip and just carve it a little (a little ghetto, a lot hot)
Hell, a guy on Ozhonda used a old Toyota Camry lip and just cut it to make fit.
Just get something that matches the shape of the front bar and go from there
Spoken Camry lip.
Hell, a guy on Ozhonda used a old Toyota Camry lip and just cut it to make fit.
Just get something that matches the shape of the front bar and go from there
Spoken Camry lip.
Edited by SHOGUNOVDDRK, 25 August 2009 - 01:55 AM.
QUOTE(SHOGUNOVDDRK;835304)
the import scene has kinda become like emo's.... its killing itself whilst looking overdressed and in drag
QUOTE(phyregod;835835)
Sig worthy. But mine is full.
#3
Posted 25 August 2009 - 02:54 AM
This is what I've currently got. I'm thinking of putting strips of white or amber LEDs in the openings. If white, they'll come on by a switch, if amber, I'll make them work like trun signals/marker lights.
It's the top section of a the old bumper from this car that had a nasty hole in the lower part.
#4
Posted 25 August 2009 - 03:55 AM
#5
Posted 25 August 2009 - 11:44 AM
Amber FTW! So is that the higher part of the bumper you used...the holes are where the lights would be??
And that Camry one is pretty sweet too!
And that Camry one is pretty sweet too!
#6
Posted 25 August 2009 - 11:49 AM
QUOTE (EuphoricBlue @ Aug 25 2009, 03:54 AM) <{POST_SNAPBACK}>
This is what I've currently got. I'm thinking of putting strips of white or amber LEDs in the openings. If white, they'll come on by a switch, if amber, I'll make them work like trun signals/marker lights.
It's the top section of a the old bumper from this car that had a nasty hole in the lower part.
Like these?
http://cgi.ebay.com/...d=p4506.c0.m245
"Your arms are too short to box with GOD."
#7
Posted 25 August 2009 - 01:32 PM
QUOTE (C8V6C @ Aug 25 2009, 09:44 AM) <{POST_SNAPBACK}>
Amber FTW! So is that the higher part of the bumper you used...the holes are where the lights would be??
Yup, those holes are the 2 dips for the headlights. I cut the top of the bumper just at the top of the body trim line, if you look at to full bumper on my car you'll see what I mean.
And yes agrezivspec, like those Just not right now. First I want to finish move then figure out my HID lights.
#8
Posted 25 August 2009 - 03:26 PM
HOME DEPOT to the rescue!!!
Door molding, Garage Molding, Gardening border... etc, etc,...
Door molding, Garage Molding, Gardening border... etc, etc,...
#9
Posted 25 August 2009 - 05:00 PM
A 1G CRX Si Lip looks great on the 3G and only needs minor trimming at the ends to fit the bumper. I fastened it securely with strategic holes and zap straps:
The 1G Integra lip is a similar option as well.
I really like the idea of cutting up a front bumper, flipping it upside down, and making a HUGE front air dam. Check out 76cffdeng's album. I know the user name is wrong but its something like that, he used this idea and has additional signal lights at the bottom of the lip... looks super sweet!!
Cheers,
Mark
The 1G Integra lip is a similar option as well.
I really like the idea of cutting up a front bumper, flipping it upside down, and making a HUGE front air dam. Check out 76cffdeng's album. I know the user name is wrong but its something like that, he used this idea and has additional signal lights at the bottom of the lip... looks super sweet!!
Cheers,
Mark
#10
Posted 25 August 2009 - 05:39 PM
#11
Posted 25 August 2009 - 06:01 PM
#12
Posted 25 August 2009 - 06:23 PM
QUOTE (agrezivspec @ Aug 25 2009, 12:49 PM) <{POST_SNAPBACK}>
I have those LED strips in amber for my daily driver. Pretty neat.
Once a woman is introduced to Colonel Angus, she'll settle for nothing less.
#13
Posted 25 August 2009 - 06:44 PM
QUOTE (Rampage @ Aug 25 2009, 07:01 PM) <{POST_SNAPBACK}>
I just had to find these pictures....
Tell me thats not the most badass thing you've seen!
Tell me thats not the most badass thing you've seen!
Is that a another G1 CRX bumper cut and flipped upside down to make a LIP??
#14
Posted 25 August 2009 - 06:47 PM
QUOTE (RARECRX @ Aug 25 2009, 07:44 PM) <{POST_SNAPBACK}>
Is that a another G1 CRX bumper cut and flipped upside down to make a LIP??
Yep.
"Your arms are too short to box with GOD."
#15
Posted 25 August 2009 - 07:41 PM
home depot is the ghetto lip.. rocked one myself on my 2nd gen..
1986 Civic Si; b16a is in.. just gotta get it running..
longest swap ever.....
longest swap ever.....