Jump to content




Attn: Panhard Bar And Camber Plate Buyers!

Started by rpr, Nov 17 2005 02:40 PM

  • You cannot reply to this topic
165 replies to this topic

#1
rpr
Posted 17 November 2005 - 02:40 PM

  • giggidy giggidy giggidy!
  • PipPipPipPipPipPip
    • Group: Super Administrators
    • Location:Erin ON, CA
    • Drives: Race: yeah right, who has time to race (2008 Civic Si, when I have time), Daily: 2006 Ridgeline
    • Image Gallery
    Garage View Garage
If you have sent me a deposit, or expressed interest in a previous post, please post here so I can get an up to date list of what I need. I'll go through my emails and PM's, but I'd like to double check here.

Details on the parts:

Panhard bar
Fully adjustable, stainless steel bar with Aurora rod ends, washers, sleeves, and custom adjustment wrench, complete bolt on replacement for existing bar.
$130US includes shipping to Canada and the Lower 48. Overseas shipping is about $25US more.
ETA - 1 - 2 weeks

Camber plates
Allows adjustment of camber and caster, gives about 1" more suspension travel and has provisions for a future strut tower bar (or make your own to fit), 6061-T6 aluminum, Aurora bearings, all hardware included, again is a complete bolt on. Can also make bushings to work with KONI shortened struts.
$230US includes shipping to Canada and the Lower 48. Not sure how much for shipping.
ETA - 3 - 4 weeks

The price MAY go up depending on raw material costs, I don't know yet. Hopefully not though. If you prepaid, I'll keep the original price.

Thanks
Tom

Panhard bar orders:
Aren D. - full
badpenny - full
staticchmbr - ? (have to check)
kakabox - interested
87ClubRed - interested
jeff420 - interested
Zephyr - interested
misfit_mafioso - interested

Camber Plate orders:
Aren D. - full
kakabox - interested
nivek2002 - full? (have to check)
"Toby, you are a thief of joy"

#2
staticchmbr
Posted 17 November 2005 - 02:59 PM

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
sent $$ for panhard bar a few months ago. let me know when these are ready wink.gif

Edited by staticchmbr, 20 November 2005 - 09:24 PM.

valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#3
kakabox
Posted 17 November 2005 - 03:00 PM

  • Turd Polisher
  • PipPipPipPipPip
    • Group: 2012 Contributor
    • Location:Seattle, WA 98115
    • Drives: from point 'A' to point 'B' daily.
    • Image Gallery
    Garage View Garage
I'm down for an adj phb and camber plates. Is the caster adjustable also w/the plates?

Cheers.

Edited by kakabox, 17 November 2005 - 03:16 PM.

Kakabox Build Thread
The Kakabox Build Index

Less is more

#4
87ClubRed
Posted 17 November 2005 - 03:14 PM

  • Soon it'll scream...for now, just a hum...
  • PipPipPipPip
    • Group: Contributing Member
    • Location:Burnaby, BC
    • Drives: '07 Mazda 3 GT / 87 CRX Si (Going under the knife)
    • Image Gallery
    Garage View Garage
I'm interested in the Panhard bar, and can send entire payment or deposit upon request.

Thanks Tom.

#5
JEFFtheJ00la
Posted 17 November 2005 - 03:41 PM

  • i was the first one to rent this monte, lol
  • PipPipPipPipPip
    • Group: Contributing Member
    • Location:nevada, Tx (bfe)
    • Drives: 86crx soon to be b20b, 96Grand am sedan(9.22 1/8th), 79Trans am 403 to 350 in prog. , 03Dakota DD, 86 civic sedan si swap dd
    • Image Gallery
    Garage View Garage
im interested in an adj panhard bar and have cash. whats the wait time?

SportInjectedClubvisit my myspace SAHCR Member

if your offended by anything i post, you need to seriously get a life

#6
Zephyr
Posted 17 November 2005 - 04:32 PM

  • On the Podium
  • PipPipPipPip
    • Group: Contributing Member
    • Location:New Jersey
Must have panhard rod. Have cash. How soon can I have it?

Z
1985 CRX Si H2 Racecar
2000 Subaru Impreza 2.5RS with a WRX swap

#7
misfit_mafioso
Posted 17 November 2005 - 07:04 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Everett, Washington
    • Drives: 1986 CRX HF
also interested in panhard bar.......haven't sent cash yet though.

#8
badpenny
Posted 17 November 2005 - 07:39 PM

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
Panhard bar PIF August 17th
Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#9
down4ce
Posted 19 November 2005 - 06:26 AM

Said I was in for panhard bar in oroginal post and still am, will send deposit ASAP

#10
EPcivic
Posted 19 November 2005 - 10:24 AM

  • 2008 & 2009 EP National Champion
  • PipPipPipPip
    • Group: 2010 Contributing Member
    • Location:Findlay, Ohio
Tom,

I'll take a set of camber plates. Let me know who much $$$ you need and I'll send it out.

-Chris

#11
rocker
Posted 19 November 2005 - 02:10 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Saskatoon SK
    • Drives: 1986 CRX DX, Acura TSX
I too will take a set of camber plates. As above, let me know how much you need down. 50% I think, correct? So $115.00 US?

Shawn
Shawn
2005 WCMA SoloII Champion - CSP
2006 WCMA SoloII First Loser - CSP
It's the one on the right...

#12
solo2cvc
Posted 19 November 2005 - 06:12 PM

  • My Son Races Cars
  • PipPip
    • Group: Members
    • Location:Virginia Beach, VA
    • Drives: 1987 Honda Civic Si (ITB/H5) SOLD
I would like a set of camber plates (pm sent).
1987 Honda Civic Si (ITB/H5)
2007 ECHC H5 Champion

#13
nivek2002
Posted 20 November 2005 - 02:37 PM

Yeah, I have been waiting on these for quite some time.

I believe I have only paid the deposit. Let me know.

Kevin


My Vouch Thread

#14
staticchmbr
Posted 20 November 2005 - 09:24 PM

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
oh, yea, im pretty sure i just sent the down payment. let me check my paypal account, and ill let you know when i sent it.

edit*--paid $50 via paypal on july 26

Edited by staticchmbr, 20 November 2005 - 09:29 PM.

valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#15
Motor City Hamilton
Posted 21 November 2005 - 03:07 PM

  • The Green Snowplow
  • PipPip
    • Group: Contributing Member
    • Location:Dearborn, MI
    • Drives: 1986 ITC Civic
Tom - I just sent you a PM, but didn't see this post. If these are going to production very soon, then I'll still buy them. Keep my name on the camber plate list and I sent you paypal of $75 back in May.

Thanks,
Keith Hamilton
My driving skills fall somewhere between The Stig and Sammy Hawkins!
Back to General Posts


  1. Red Pepper Racing
  2. → 1G Honda CRX/3G Honda Civic
  3. → General Posts
  4. Board rules