want to know if someone has a set of new stock ew4 pistons. or where to buy the pistons/rings/rod bearings. stock bore. thanks.
1
Wtb: Ew4 Pistons
Started by mindlessracing, Sep 26 2006 12:22 AM
8 replies to this topic
#1
Posted 26 September 2006 - 12:22 AM
#2
Posted 26 September 2006 - 12:26 AM
I've got some from before switching to D16 pistons. Just the heads though, no rods. 180k miles on 'em, but the engine still had good compression.
#3
Posted 26 September 2006 - 12:30 AM
i have tsome....they aren't new though
1995 ford ranger (beater)
1986 crx si..
wifeys 2000 civic ex ebay coilovers and 17in drag dr11 with nexxen z rated tires soon to be b16 powered with b20 automatic trans (girls)
1986 crx si..
wifeys 2000 civic ex ebay coilovers and 17in drag dr11 with nexxen z rated tires soon to be b16 powered with b20 automatic trans (girls)
#4
Posted 26 September 2006 - 01:35 PM
ya i am looking for some new ones, i have a couple motor with 3 good ones per but i am going to sell the 3g si so i can start on the 1g crx si and kinda want to have new stuff.
#5
Posted 28 September 2006 - 04:09 PM
k all i found some. not sure the quality but i will let you know when they show up.
got them from my local carquest store. pistons with rings and new rod bearings for the ew4. with shipping and my discounts they are $145. not bad i don't think. store bore.
got them from my local carquest store. pistons with rings and new rod bearings for the ew4. with shipping and my discounts they are $145. not bad i don't think. store bore.
#6
Posted 18 November 2006 - 07:46 PM
j/w what are those stamped and what are your stockers stamped..
He who dies with the most toys, wins.
#7
Posted 19 November 2006 - 01:13 AM
can't remember right now but they were marked the same...... didn't come in oem honda packaging but same markings all around.
#8
Posted 27 November 2006 - 06:03 PM
Damn if you didn't mind NEW .020 Pistons I have a full bottom end rebuild parts, include new OE rod's, arp rod bolts, bearings and polished crank, oil pump, gasket set. Brand NEW IN BOX, try'n to get rid of cause I don't ahve time for my car anymore. I have an ad on portland.craigslist wanted 450 for all of it, which is quite a bit less than what I paid., not sure what shipping would be though.
-ghost[iLs]
-ghost[iLs]
QUOTE (mindlessracing @ Sep 25 2006, 09:22 PM)
want to know if someone has a set of new stock ew4 pistons. or where to buy the pistons/rings/rod bearings. stock bore. thanks.
Edited by ghostils, 27 November 2006 - 06:03 PM.