Jump to content




Fs: B Series Parts, D16a1 Stuff, Turbo Parts


  • You cannot reply to this topic
37 replies to this topic

#1
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
LOWERED PRICES. NEW stuffON pg3.

need to make room..i have collected too much stuff! large items are pickup only.

PAYPAL ADDRESS: [email protected]


b series parts:

im selling my type-r girdle set, because i decided not to finish my ls/vtec. this is a complete bolt-on kit to any b series to strengthen up your bottom end. comes with oil pan, windage tray, oil pickup, girdle, and mains/bolts. asking $180 for full setup. i sell on ebay under the name staticchmbr if you need any vouches. over 200 positive comments.
this picture was taken when i coulnd't find the windage tray, but i have found it, and it is included.




- NEW GSR timing belt $60 obo

- obd-2 b18b head with only 45,000. comes with dizzy and IM $150 obo.

- b18a complete block with full acl bearing kit (not installed) SOLD!!!

- NEW .20 oversized b16 pistons with NEW rings (not installed) $100 obo

- set of b16 pistons and rods..great condition $50 obo

d16a1/zc parts:

-89 d16a1 head $50 obo

-89 d16a1 head. has some metal shavings in it when i spun a bearing. no scratches in cam caps. great for port and polish then hot tanking $50 obo

-89 d16a1 intake manifold $30 obo

-86-87 d16a1 pistons/rods/NEW honda rings installed, ARP rod bolts $120 obo

-87 jdm dohc zc intake manifold, fuel and TB $50 obo

turbo parts:

-subaru rhb5 turbo has some shaft play. never used this myself. $30 obo

-crush bent 2.25" piping for 86 crx. im keeping 1 bend for the bov, and the bend from the turbo (1x45*, 4X90*, some straight pipe) $30 obo

-NEW greddy weld on BOV flange $25 obo


-NEW greddy knockoff BOV (purple) $50 obo


-NEW large heavy duty frot mount intercooler 31x6x3(exact same one. bought one for a friend, and he decided not to use it) $150



-used turbo mazda 626 intercooler. has in/out in the back $30 obo

-used mazda 626 bov. plastic. looks like 2g dsm and comes with elbow. $20 obo

84-87 crx parts:

- 87 crx dx motor/tranny 85,xxx original miles. ran fine before cam broke. bought replacement head/cam for it. pickup only $100 obo

- complete 86 crx dx wiring harness (entire car) $50 obo

- 86 crx si rear wiper/motor/plastic trim cover...worked great. needs new wiper blade. $20 obo

- 86 crx si turn signal/wiper switch. works fine, but turn signal part is cracked. can be glued. its not broken all the way off $25 obo

- crx oem steering wheel $10 obo

- complete 87 crx dx a/c setup. pickup only $50 obo.

- 86 crx headlights. some small knicks from rocks, but no cracks, no chips. you can probably even buff them out. $500 obo ahhaha lights really $50 obo

-86 crx hf half size rad. w/ NEW rad cap. has few bent fins, but works fine/w no leaks $50 obo

-86 crx si manual gauge cluster (works perfect 154,xxx) $20 obo

-87 crx dx manual gauge cluster (works perfect 85,xxx miles) $30 obo

-86 crx si rolling shell. interior and exterior stripped. has a bunch of rust that has to be fixed. PERFECT RACE CAR PROJECT. can include seats, belts, gauge cluster FREEEEEEEEEEEEEEEEEEEEBIE!! pickup only


MANY more parts to come. pics will be posted upon request. ask me if you need anything, i may have it! taking trades for ARP d16a1 dohc head studs (1 long bolt), roll cage, computer system, MIG welder, etc.
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#2
projEKtjokes

  • Wanna see some mexican magic. . .
  • PipPipPip
    • Group: Members
    • Location:LA yton, Da 801 Utah
    • Drives: 84 Nissan S12 Silvia, 97 EK hatch and coupe, 90 Mitsu Mighty Max, 87 Si Hatch
You dont want to ship??? I want that b18 block, you can put it in a rubermaid tub and send it that way pretty easy ive done it a few times. Let me know.

user posted image


#3
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
not really interested in shipping that way..they probably wont want to insure it. i dont want to risk sending something like that and having it break. sorry
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#4
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
updated crx parts
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#5
Chaos325

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Collingswood, NJ
    • Drives: 89 Integra LSt, 91 Accord LX Wagon
pics on the heads.
89 Integra 1.6 LSt (Daddy's Toy)
92 Honda Prelude 2.3 Si (new Daily Driver)
98 Dogde Grand Caravan 3.3 SE TLEV (Kiddie Hauler)

check out the pile, make offers!
My PhotoBucket of Parts

#6
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
ill get them up today or tomorrow
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#7
Richard

  • Speedy
  • PipPipPipPip
    • Group: Members
    • Location:Victoriaz British Columbia
    • Drives: NZDM? 85' Civic Hatch LX- D16A1,92 Toyota Soarer Big Single and a Bunch of Other Stuff
you think the sub turbo is usable?

#8
SilverRex-Bullet

  • Nerd
  • PipPipPip
    • Group: Members
dibs on hf rad...... ph34r.gif

#9
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
QUOTE (Richard @ Aug 5 2006, 03:49 PM)
you think the sub turbo is usable?



the turbo looks decent, but pretty dirty. it has some grime on it from the old engine bay. ill have to check the actual amount of play on it, and if it was blowing any oil.
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#10
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
QUOTE (SilverRex-Bullet @ Aug 15 2006, 07:01 PM)
dibs on hf rad...... ph34r.gif



hf rad is still sitting and waiting for a buyer. shipping on it will be about $15 or so
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#11
SilverRex-Bullet

  • Nerd
  • PipPipPip
    • Group: Members
so like 60 shipped would be good wink.gif if the shipping is 15bux?

pics of rad plz smile.gif

Edited by SilverRex-Bullet, 16 August 2006 - 04:29 PM.


#12
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
QUOTE (SilverRex-Bullet @ Aug 16 2006, 04:28 PM)
so like 60 shipped would be good wink.gif if the shipping is 15bux?

pics of rad plz smile.gif


yup, $60 shipped is perfect. my camera is acting up, so ill have to get my friends
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#13
crxrustorian

  • Granny
  • Pip
    • Group: Members
    • Drives: 90crxsi
im interested in parts as well as pics of the 86 si shell pics of the rust whats on the car still ,pics of of every angle to see what kind of project it could be thanks after the pics ill go ahead with making a deal
thankyou my [email protected] or post it on this site or to my screen name

#14
xThexHeadx

  • rpr member
  • PipPip
    • Group: Contributing Member
    • Location:Worland, WY
    • Drives: ------->
I'd like to purchase the 87 ZC IM/TB and fuel rail... is it still available?
1990 Honda Civic Wagon RT4WD
2004 Honda Interceptor VFR800

1992 Dodge Power Ram 250, Cummins Turbo Diesel (350/800) Tow/Haul



#15
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
QUOTE (crxrustorian @ Aug 16 2006, 07:54 PM)
im interested in parts as well as pics of the 86 si shell pics of the rust whats on the car still ,pics of of every angle to see what kind of project it could be thanks after the pics ill go ahead with making a deal
thankyou my [email protected] or post it on this site or to my screen name


its very rusty in the floorboards, the jack points work, but are unstable, and above the rear wheels is "fixed" with some tiger-hair fiberglass. it doesn't have any plastic body panels on it, but it has all glass, hood, doors, sunroof, etc. its just a rolling shell. it would be good if you wrecked your crx and had all of the parts to put into this one. pics are on hold until i get a camera

QUOTE (xThexHeadx @ Aug 17 2006, 08:43 AM)
I'd like to purchase the 87 ZC IM/TB and fuel rail...  is it still available?


someone was interested in it already. all put you next in line if he doesnt come through.
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.