9 replies to this topic

[d15vtec]

[COLOR=green] i have an 86'crx dx,its carberated.what can i do for modifacations?does anyone know if i can swap a fuel injected manifold for the carberated one?anyone know of any bodykits?will rota wheels fit the 1st gen?PLEASE HELP ANYONE?]

[boman]

FAQ.

What are your intentions?

[d15vtec]

WHAT ARE MY INTENTIONS! WHAT DO YOU THINK! no mater i found a replica mugen body kit,at my local tuner shop which happens to be versus motorsports here in AZ.also got my rotas!

[Disco Stu]

Given your name, it looks like you want a D15 with VTEC. Good luck!
The later civics do have a D15 that can do VTEC, but mounting them in a first gen will mean some customization, ie getting a welder, moving and or fabbing mounts, and some gentile persuasion with a BFH most likely. You're also in a bit of a fix with the carb setup.
To go fuel injection, you will need the complete Si intake manifold, fuel lines, engine AND chassis wiring harness from the fuel tank up, an Si fuel pump, as well as the fuel lines, an ECU, and probably a few other things I'm missing. It's a pretty big project. You're probably better off going for a dual carb swap, or maybe even a carb'd ZC swap (First gen Integra, not JDM ZC like the second gen's swap in). That'll give your car a good kick in da pants.

[4dr]

WHAT ARE MY INTENTIONS! WHAT DO YOU THINK! no mater i found a replica mugen body kit,at my local tuner shop which happens to be versus motorsports here in AZ.also got my rotas!

sounds like you want it to look fast and run a 18sec 1/4

NICE!!!!!!!!(note sarcasm)

the carbed d16a1 is prolly you best bet and is what i am looking to do here in the soon future.

HOWEVER,
my car needs paint(badly)
id like some wheels(badly)


i however cant follow the trend of "all show, and no go"

[d15vtec]

I DONT WANT A D15B,I ALREADY HAVE ONE IN MY EG HATCH! BUT FOR MY CRX,I NEED SOMEONE WHO KNOWS WERE I CAN GET A WEBER CARBERATER FOR MY D15A2

[4dr]

lol try googling
"weber carbuerator"

lookin about 1100 bucks tho for brand new as far as the research that personely have done.

[nighthawk]

weber dcoe's are for sale on e bay all the time. but you'll have to find a manifold. weber sells them for the d16's i think. the best way to mod a carbed d15 is intake/carb and headers/exhaust. if money allows cams/porting or at least port match and remove casting flash. the other option is the one i am doing i bought an 88 teg and am switching everything over wiring harness and all. it is easier if you have a complete donor car

HTH Cheers Rob

[CRXfanatic]

First of all, stop yelling.

So get some carbs, or a single downdraft carb.

http://piercemanifolds.com
http://www.carbs.net
http://www.redlineweber.com

My 87 DX

[4dr]

damn that thing looks clean and simple with all the factory carb hoses and shit gone.