1G Crx Rear Crossmember
#1
Posted 28 August 2018 - 11:45 AM
- Acre's Hatch likes this
#2
Posted 28 August 2018 - 12:32 PM
Hey,
I have a factory panhard bar in good shape I could ship from SC.
Let me know.
Tim
cell/text: 864 414 0205
#3
Posted 28 August 2018 - 01:47 PM
in looking for the actual crossmember part #70280-sb2664zz
Hey,
I have a factory panhard bar in good shape I could ship from SC.
Let me know.
Tim
cell/text: 864 414 0205
#4
Posted 28 August 2018 - 01:51 PM
I'm parting a no rust hatchback now. Have a picture?
Are you talking about the rear bumper support?
Tim
#5
Posted 28 August 2018 - 02:22 PM
#6
Posted 28 August 2018 - 08:57 PM
I'm parting a no rust hatchback now. Have a picture?
Are you talking about the rear bumper support?
Tim
http://www.redpepper...showtopic=41791
exactly what this guy is going through the part with the hole would be the part im talking about so yes i believe the panhard bar mount
- kedwards likes this
#7
Posted 29 August 2018 - 06:16 AM
OK, I see what is going on now. You should probably talk to Kevin Acre (he is on facebook) down in Opelika Alabama. He is cutting up a CRX now and could likely get you a clean rust free mount if you want to go that route.
I don't want to cut up my hatch just yet.
Tim
#8
Posted 29 August 2018 - 07:22 AM
Yes sir. About to cut up an 85 CRX. Wrecked heavy in the front. No damage or rust that I've seen on the car. How big a section do you want and where are you located.
3G Southern Civics
#9
Posted 29 August 2018 - 06:53 PM
Yes sir. About to cut up an 85 CRX. Wrecked heavy in the front. No damage or rust that I've seen on the car. How big a section do you want and where are you located.
if i could get the whole rear crossmember that would be sweet but im located in buffalo ny and theirs multiple places where this thing is rotted im just trying to have it pass inspection so i can drive it through one more winter until i put a f20b in my accord next summer
#10
Posted 30 August 2018 - 05:11 AM
I'm parting a no rust hatchback now. Have a picture?
Are you talking about the rear bumper support?
Tim
http://www.redpepper...showtopic=41791
exactly what this guy is going through the part with the hole would be the part im talking about so yes i believe the panhard bar mount
My picture referenced above (from 2009) is no longer a good link, but my measurement lists 27"X34"X9.5", from 1/8" plate. It was pretty easy to just bolt up, and I never had any problems with it.
Keith A. Edwards
Suffolk, VA
1.75 1st gen. CRXs
former ECHC H5 Champion
#11
Posted 07 September 2018 - 07:56 AM
I haven't forgotten you. Getting under the car while it's still daytime hasn't worked this week.
3G Southern Civics