Hey everybody, I need a little advice. I am about to put a SOHC Zc engine into my 86 CRX mini stock and rules say must be carbed. Which intake manifold can I use for this and which carb would work best? Thanks.
0
Carbed zc
Started by hondacrx44, Dec 31 2002 05:14 AM
1 reply to this topic
#1
Posted 31 December 2002 - 05:14 AM
#2
Posted 31 December 2002 - 10:32 AM
ahhhh! hmmmm. I wonder if the DOHC and SOHC have universal intake manifolds. Can't you just say that car came in a Fuel Injected model and you'll be okay? Just say it's an Si. But as for carbed intake manifolds. I personally was lookinf for a set until I stumbled upon a Carbed ZC (DOHC). They are very rare though. I would think you would have to modify your own intake manifold. Such as using your FI ZC intake the cut it off half way and then find a manifold that lines up close to it and cut the other half off and weld the 2 together(extremely hard to make it good I would think) These are long shot ideas but thats what I started thinking when I needed one. You could search for a carbed ZC but only 3 of us on this board has one and we just stumbled accross them. I'm not sure what tom is doing with his but I don't think he'd part the intake and carb. I'm sorry if this is no help to you but finding an intake manifold for a ZC that uses a carb is extremely hard. I hope you figure somthing out and if you have any more questions please ask them. ...there is another option that I just thought of but it costs a lot. You could use weber carbs and get the manifold with them. Webers will give you lots of power. I believe they go for about 1200 USD? But on ebay sometimes you can find them pretty cheap
PEACE!
Brandon
PEACE!
Brandon
If anyone can tell me somting better than a Weberized ZC I have yet to hear it!