Update 5/19/08: Modifying the P06 Part 1
Just a short update, today I spent a little time modifying the P06 I bought for data logging. I'm going to try an use one of those little USB to TTL Serial gizmo's I got. I still haven't "chipped" the ECU yet in the pictures. I plan on showing that later. Some pictures....
The ECU I got is for an automatic, I think, so I will need to convert it as well to manual. The super universal P06:
![](https://www.redpepperracing.com/forums/gallery_images/1211242823/gallery_4606_9_6187.jpg)
I was surprised to see it came with OBD1 plugs. A bit short on wire length, but hey, I'm thankful!:
![](https://www.redpepperracing.com/forums/gallery_images/1211242823/gallery_4606_9_253945.jpg)
I think I'll put the gizmo here:
![](https://www.redpepperracing.com/forums/gallery_images/1211242823/gallery_4606_9_105469.jpg)
Here is the USB to serial device mounted in the case:
![](https://www.redpepperracing.com/forums/gallery_images/1211242823/gallery_4606_9_36169.jpg)
And the USB port on the end:
![](https://www.redpepperracing.com/forums/gallery_images/1211242823/gallery_4606_9_50863.jpg)
I need to make a cable to connect it to the serial port on the ECU board and chip the board as well. Next time.
Take care,
David