Anyone have a spare driver's side spindle laying around they'd like to sell? I need one in the next week, so any help would be appreciated.
Looking For Driver's Side Spindle
#1
Posted 06 October 2016 - 08:36 AM
#2
Posted 06 October 2016 - 08:41 AM
Uh oh, what happened? I may have on lying around you can just have. I'll check when I get home today.
Build thread: "Skittle 2.0" - http://www.redpepper...l=&fromsearch=1
Build thread 2: "Red Daily" - http://www.redpepper...topic=55687&hl=
My Classic Honda Blog - http://genone-blog.blogspot.com/
Road & Track magazine: "When they get around to listing the top good-time inventions of the late 20th century, we're willing to bet that right up there with the hang gliders, ultra lights, sailboards and jet skis you'll find the Honda Civic CRX. And we're willing to bet that the CRX won't be at the bottom of the short list--particularly if the CRX in question is an Si."
#3
Posted 06 October 2016 - 08:50 AM
That's the part you brought up last night that I need for Chedda's rear camber/caster plates. I thought it was just a bolt that I could source from the parts store but it needs to be the whole driver's side rear spindle.
#4
Posted 06 October 2016 - 09:12 AM
Damn! Well, nevermind then. I may have a front one, but not a rear spindle. Sucks about needing an extra drivers side spindle. Guess I'll be needing one in the future too.
Build thread: "Skittle 2.0" - http://www.redpepper...l=&fromsearch=1
Build thread 2: "Red Daily" - http://www.redpepper...topic=55687&hl=
My Classic Honda Blog - http://genone-blog.blogspot.com/
Road & Track magazine: "When they get around to listing the top good-time inventions of the late 20th century, we're willing to bet that right up there with the hang gliders, ultra lights, sailboards and jet skis you'll find the Honda Civic CRX. And we're willing to bet that the CRX won't be at the bottom of the short list--particularly if the CRX in question is an Si."
#5
Posted 06 October 2016 - 12:08 PM
#6
Posted 10 October 2016 - 12:54 AM
#7
Posted 12 October 2016 - 06:42 AM
They are available new from the parts store, Dave
I've checked the standard parts stores, including rockauto and can't seem to find where they're listed. Any help would be appreciated if you know specifically what parts store carries them.
#8
Posted 12 October 2016 - 10:52 AM
Well a quick search by Honda part number provided these two sites showing them available:
http://www.hondapart...10-SB2-010.html
http://www.bernardip...10-SB2-020.aspx
I'd be very surprised if they actually have them, however since the one is listed as coming through the Vintage Parts location...best of luck!
"Old and usually in the way" - Check out my '86 3G build in "VIEW GARAGE"
#9
Posted 12 October 2016 - 04:06 PM
Cool site, I'll be sure to bookmark that one. I assume that R. RR means right rear or something of that nature, which sucks. Can't seem to get the great folks off the 3g/1g facebook pages that are parting out their cars to sell me theirs for some reason... No candidates at the local parts yards either.
#10
Posted 12 October 2016 - 11:37 PM
Sorry...I knew you wanted the driver's or left side and went and listed the passenger's side (See "Old and usually in the way"). On going back and checking specifically the LEFT side spindle, HondaPartsNow, the first link shows discontinued but the second link shows this side still "available" through Vintage Parts also so maybe...
http://www.bernardip...11-SB2-020.aspx
Part # 52211-SB2-020
"Old and usually in the way" - Check out my '86 3G build in "VIEW GARAGE"
#11
Posted 13 October 2016 - 06:45 AM
I have one or two of them under one of the workbenches in the garage.
Also have a complete HF rear axle (without the aluminum drums). I just have to pull it off the car.
If you love the Elise, drive a Se7en - Caterham or whatever...
It has even less content than the Elise, is less graceful looking
...and changes direction like a ping pong ball whacked by Thor.
#12
Posted 13 October 2016 - 07:39 AM
Thanks Geez!
I have one or two of them under one of the workbenches in the garage.
Also have a complete HF rear axle (without the aluminum drums). I just have to pull it off the car.
Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you.
#13
Posted 13 October 2016 - 08:09 AM
Thanks Geez!
Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you.
If you get two, I'll buy the extra one off you in anticipation of doing this same mod in the future!
Build thread: "Skittle 2.0" - http://www.redpepper...l=&fromsearch=1
Build thread 2: "Red Daily" - http://www.redpepper...topic=55687&hl=
My Classic Honda Blog - http://genone-blog.blogspot.com/
Road & Track magazine: "When they get around to listing the top good-time inventions of the late 20th century, we're willing to bet that right up there with the hang gliders, ultra lights, sailboards and jet skis you'll find the Honda Civic CRX. And we're willing to bet that the CRX won't be at the bottom of the short list--particularly if the CRX in question is an Si."
#15
Posted 14 October 2016 - 12:57 PM
Thanks Geez!
Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you.
I didn't get a chance to look for them yesterday, I will have plenty of time this weekend however.
I'll let you know.
If you love the Elise, drive a Se7en - Caterham or whatever...
It has even less content than the Elise, is less graceful looking
...and changes direction like a ping pong ball whacked by Thor.