Is there any springs I can swap out for the rear ones that will support more weight? I have about 400lbs in the back in audio equipment, so it sags a little.
0
Heavier Springs For The Rear
Started by Andrew_as, Feb 08 2014 08:29 PM
6 replies to this topic
#1
Posted 08 February 2014 - 08:29 PM
#2
Posted 08 February 2014 - 08:56 PM
1st gen Integra springs and RSX springs are a direct swap if I remember correctly. However for me the best solution is to make a top hat adapter so you can use the more modern smaller diameter springs.
Oh, you don't know if it's legal?
you're in california of coarse it's ILLEGAL!!!!!
you're in california of coarse it's ILLEGAL!!!!!
#3
Posted 08 February 2014 - 09:06 PM
Try Chedda Auto.
http://www.cheddasauto.webs.com/
He has rear spring adapters to run a 2.5" spring in the rear of our cars.
Hypercoil has a large selection of 2.5" springs in a variety of heights and rates.
http://www.cheddasauto.webs.com/
He has rear spring adapters to run a 2.5" spring in the rear of our cars.
Hypercoil has a large selection of 2.5" springs in a variety of heights and rates.
#4
Posted 08 February 2014 - 09:07 PM
Chedda sells em too. The spring adapter. I need to go that route.....
Edit: 3rd gen sinner beat me by one minute....... Chedda's stuff is nice (understatement). I'm bout to order a shifter linkage bushing kit (orgasm). Probably the spring adapter/bushings (orgasm) also. Seems to be an inexpensive way to add lots of rear spring options.
Edit: 3rd gen sinner beat me by one minute....... Chedda's stuff is nice (understatement). I'm bout to order a shifter linkage bushing kit (orgasm). Probably the spring adapter/bushings (orgasm) also. Seems to be an inexpensive way to add lots of rear spring options.
Edited by Dirtcircle86, 09 February 2014 - 01:34 AM.
#5
Posted 08 February 2014 - 09:12 PM
#6
Posted 09 February 2014 - 02:56 PM
Call Ground Control and get their rear coilover kit with a custom heavy duty spring rate.
"for all your pre-1988 Honda restoration needs 206-940-8173"
"vouch thread"
http://www.redpepper...l=&fromsearch=1
1g, 2g, 3g Civic
1g CRX
1g Integra
1g, 2g, 3g Accord
1g, 2g, 3g Prelude
cars, parts, collectibles and more!
http://www.nwclassichonda.com
#7
Posted 09 February 2014 - 03:46 PM
Thanks for the advice, Im going to go with the coilover conversion. Just ordered it!
- NWClassicHonda likes this