Just as title says. I am wanting to get some 13x7 +3 panasports and put 185/60/13 toyo R888's on them and wondering if these will fit in a 1st gen crx. Ideally want the tires to fit inside the fender. Will probably roll the fenders. If this won't fit what will? 13x6 +2? If you guys have some pictures of panasports on a 1st gen crx, please post. Thank you
1
Would 13x7 +3 Panasports Fit In Crx Fenders?
Started by Hal, Sep 16 2010 01:45 AM
5 replies to this topic
#1
Posted 16 September 2010 - 01:45 AM
#2
Posted 16 September 2010 - 09:44 AM
QUOTE (Hal @ Sep 15 2010, 11:45 PM) <{POST_SNAPBACK}>
Just as title says. I am wanting to get some 13x7 +3 panasports and put 185/60/13 toyo R888's on them and wondering if these will fit in a 1st gen crx. Ideally want the tires to fit inside the fender. Will probably roll the fenders. If this won't fit what will? 13x6 +2? If you guys have some pictures of panasports on a 1st gen crx, please post. Thank you
"+3"
Does that mean the offset is 3mm greater than stock?
They will fit, although it will be tight at full suspension compression.
Now tell us where you found Panasports and how much are you paying for them. And if you don't want them, I might be interested.
Scott
Form Follows Function
#3
Posted 16 September 2010 - 12:45 PM
+3 is positive 3" backspace Scott.
My 13x8's are 5" backspace they fit just fine, but they do stick out of fenders by a little bit.
So a 3" backspace on a 7" wheel is going to stick way out.
My 13x8's are 5" backspace they fit just fine, but they do stick out of fenders by a little bit.
So a 3" backspace on a 7" wheel is going to stick way out.
#4
Posted 16 September 2010 - 01:22 PM
QUOTE (DEIVIONCRX @ Sep 16 2010, 10:45 AM) <{POST_SNAPBACK}>
So a 3" backspace on a 7" wheel is going to stick way out.
Not interested.
For a street driven car, 13x6 works fine for me.
Form Follows Function
#5
Posted 16 September 2010 - 04:09 PM
QUOTE (Hal @ Sep 15 2010, 11:45 PM) <{POST_SNAPBACK}>
Just as title says. I am wanting to get some 13x7 +3 panasports and put 185/60/13 toyo R888's on them and wondering if these will fit in a 1st gen crx. Ideally want the tires to fit inside the fender. Will probably roll the fenders. If this won't fit what will? 13x6 +2? If you guys have some pictures of panasports on a 1st gen crx, please post. Thank you
The +3 is actually the offset in mm.
#6
Posted 16 September 2010 - 04:30 PM
3mm positive offset you will have a lot more room between the wheel and suspension, but its going to stick out about 60mm more than stock.