This will include the following:
2 aluminum adapter sleeves
2 double sealed spherical bearings (pressed in)
2 grease nipples (including shields and nuts)
2 torsion arm spacers
2 retaining bolts
Drill bits and Tap
The control arm kit is $200.
This kit will include:
2 aluminum adapter sleeves
2 double sealed spherical bearings (pressed in)
4 retaining bolts
2 grease nipples
4 inner adapters
Drill bits and Tap
As a group buy were are going to do these two sets for a total of $375.
For those who are getting the trailing arm kits at the same time, they will be $175-$25 discount for a total of $150 + $375 = $525.
Please send all deposits to [email protected] via www.PayPal.com
To see the entire thread about how these are made and tonnes of photos including install please visit the page below. Entire kit photos will be added to this thread as they are built.
http://www.redpepper...opic=54250&st=0
Group Buy Members:
Aren D. deposit paid
Dwend (full kit) Paid deposit paid 12mm
87MugenProCr-X deposit paid
Power Wheels deposit paid +
ATXBoy (full kit)
Vicious (full kit)
Cahitapower deposit paid
Anjin (full kit)
TimmyDogg
ED Funk deposit paid for two sets $500
![Posted Image](http://i3.photobucket.com/albums/y64/cheddaj/IMAG0520.jpg)
![Posted Image](http://i3.photobucket.com/albums/y64/cheddaj/ControlArmSpherical17_zpsf8f707b2.jpg)