Edited by BlackRose, 26 March 2012 - 06:12 PM.
1
Zc Tranny Question
Started by BlackRose, Mar 26 2012 06:11 PM
6 replies to this topic
#1
Posted 26 March 2012 - 06:11 PM
I have been having some trouble locating a MT for my D16A1/ZC build. A co-worker was telling me that the MT from a `91(?) DX hatch will fit. Is there any truth in that? Oh, the car is an `85 CRX Si.
#2
Posted 27 March 2012 - 12:39 AM
That will not work in your car. You will need a G1 teg D16 or a early gen ZC tranny.
"for all your pre-1988 Honda restoration needs 206-940-8173"
"vouch thread"
http://www.redpepper...l=&fromsearch=1
1g, 2g, 3g Civic
1g CRX
1g Integra
1g, 2g, 3g Accord
1g, 2g, 3g Prelude
cars, parts, collectibles and more!
http://www.nwclassichonda.com
#3
Posted 27 March 2012 - 05:37 AM
^+1
The CG transmission is the only one that will fit the D16A1/Integra ZC. You can find them in 1986-89 Integras.
The later ZC's were able to accept other trannys which is probably what your co-worker was talking about.
The CG transmission is the only one that will fit the D16A1/Integra ZC. You can find them in 1986-89 Integras.
The later ZC's were able to accept other trannys which is probably what your co-worker was talking about.
#4
Posted 27 March 2012 - 06:48 AM
ARGH! So, if I have an 86-89 D16A1 (1G Teg) I have to use the tranny from the Teg in my `85 CRX? Damn, having trouble locating one here.....
#5
Posted 27 March 2012 - 09:04 AM
#6
Posted 27 March 2012 - 11:56 AM
Thanks Jeff! I found 2 or 3, within 300mi.
One question tho. Is there a difference between the `86/`87 and the `88/`89 trannys?
One question tho. Is there a difference between the `86/`87 and the `88/`89 trannys?